How To Fix Samsung Refrigerator That Keeps Dispensing Water? (Easy Steps!) [2023]

Sharing is caring!

How To Fix Samsung Refrigerator That Keeps Dispensing Water? Due to the numerous electronic and practical features, such the exterior water dispenser, refrigerator prices have gone up recently.

You can swiftly and easily drink clean, ice-cold water thanks to them. Your water dispensing machine may still have some technical issues, though, just like any other device.

How To Fix Samsung Refrigerator That Keeps Dispensing Water
How To Fix Samsung Refrigerator That Keeps Dispensing Water

Because of trapped air in the waterline or ice buildup in the ice chute, Samsung refrigerators may continue to dispense water. If the water filter is clogged or there is a child lock on the fridge, no water may be coming out of it.

This post will explain how to fix each of the aforementioned issues and get your Samsung refrigerator up and running once again. Additionally, it will cover related subjects like how to fix a refrigerator that keeps dispensing water and what to do if your refrigerator dispenses water that is not cold enough.

VIDEO: Troubleshoot Water Dispenser


How To Fix Samsung Refrigerator That Keeps Dispensing Water?

To troubleshoot a refrigerator that is not dispensing water:
1. Verify that the water line is connected correctly.
2. Inspect the water filter for any blockages or damage.
3. If neither of these is the issue, it is possible that the water inlet valve may need to be replaced. Unplug the refrigerator and disconnect the water line from the inlet valve to do this. Then, install a new inlet valve.

The water dispenser in your refrigerator typically drips water for a short while after usage. As a result, you must have glass available to catch a few drips. What should you do, though, if your refrigerator continues to leak water?

Recommended:  What is Samsung Flow? [2023] (Answered)

The following are the most frequent causes of a dispenser that leaks continuously:

  • A buildup of ice or ice residue in the ice chute: To fix the issue, simply remove the ice and clean the ice chute. Make sure it stays entirely dry.
  • After a new installation or filter change, there may be trapped air in the water line. It’s very likely that you will need to remove the whirlpool refrigerator’s doors. You should check the water lines and couplers once you put them back on to make sure they are connected properly. If this doesn’t happen, air could enter the water coupler and cause a drop. You can reach your coupler using the best method available with the help of your user handbook. When you replace the water filter, air might also get stuck in your water line. Until it stops, pour water into a big pitcher to release any trapped air. When the stream stops splattering and becomes steady before ceasing, you know everything is fine.
  • Failure of th ge refrigerator’s doors to establish an airtight seal: Every refrigerator door has a seal or gasket around the outside that aids in making it airtight once it is closed. However, if the seal is not airtight, you can experience defrosting and water leaking issues. When you notice dampness along the door’s borders, it is simple to determine whether the seal is to blame for your leak.
  • Always make sure the seal is in good condition and is clean. Make sure you receive a replacement if it is destroyed. Run it through a low-heat drier to give it more flexibility and make it simpler to fit in the refrigerator.
  • Get assistance from a maintenance expert to avoid any issues while installing a new seal.


1. Examine the condition of your dispenser lock.

dispenser lock
dispenser lock

The dispenser lock feature is typically found in Samsung refrigerators, and it can be activated and deactivated by pressing and holding it for around three seconds. 

When you bump into the panel, the dispenser lock mechanism helps to stop any unintentional water ice production idispense. Additionally, it helps keep kids from tampering with the settings.

Recommended:  How Wide Is A 85-Inch TV? (Answered)

You can choose from a number of modes for the lock feature. They consist of water, ice cubes, and crushed ice. Make sure to select the water mode if you wish to dispense water.

2. Examine the condition of your water and ice filters.

Water filter
Water filter

Any particles or impurities that are still present after water treatment must be removed by the ice and water filter. It is made of a cloth filter and carbon. When you use it frequently, the built-up trash may prevent water from reaching the dispenser.

As a result, it is wise to replace your water filter every six months. The time frame could, however, be shorter depending on the water quality in your area.

Remove your water dispenser first, then check to see if the water valis flowing. If it doesn’t, the filter needs to be changed. It is preferable if you consult a professional installer rather than attempting it yourself.

3. Examine Your Water Line

Water Line
Water Line

The water line is almost certainly obstructed if the water in your refrigerator dispenser stops flowing. Ice or air buildup could cause the water dispenser pipe in your refrigerator to block. A reduction in pressure and drippy water flow result from air getting in the way of the waterline.

In contrast, the passage is fully blocked by ice, which prevents any water from passing through. For safety concerns, make sure to unplug your refrigerator’s electricity and move it away from the wall before checking for any obstructions in your water line.

Due to how quick and simple the process is, you do not need to rehouse your food. Make sure you have a towel on the ground to catch any leaks.

The water dispenser line must first be removed from its mounting. Check to check whether any water flows by holding down the water button. If it does, an air clog was the cause of the issue. If not, ice might be to blame for the obstruction.

You could aid the ice’s defrosting by leaving it unplugged for a couple more hours. Once finished, you can re-plug the fridge’s electricity and reattach the dispenser line. Then your refrigerator will function properly once more.

Recommended:  How Accurate is Samsung Health [2023]? (Answered)


You must give your refrigerator Samsung ice maker enough time to cold your water control lockvalve to the levels you consider reasonable. It should take close to 15 minutes for the water to chill down to the refrigerator’s internal temperature if the reservoir is empty.

The temperature of the area will also affect the time. On a warm day, the refrigerator may take a little longer to cold the water.

The water appears warm because there is some water that has remained in the pipes between the water tank and dispenser. Therefore, before getting yours to drink, you can think about letting the water trickle for a short while.


You can benefit from a lot of benefits when you purchase a Samsung refrigerator with a water dispenser. However, just like with any other item, using it could provide you with some unique difficulties. The issues, though, might not be too difficult for you to solve on your own.

You may now have cold, fresh water whenever you want by using the aforementioned techniques to fix your water dispenser problems.

Always be on the lookout for issues and deal with them right away rather than waiting for them to go away. The majority of problems occur during the installation of a new refrigerator or relocation.

Frequently Asked Questions about How To Fix Samsung Refrigerator That Keeps Dispensing Water

Why won’t the water dispenser shut off?

The dispenser lever or switch may be stuck in the “pushed in” position if water or ice dispenser keep coming out continually. The dispenser’s accumulation of residue is typically to blame for this.

How is a water dispenser reset?

Option 3: Turn off your cooler and try “resetting” it by taking out several cups of water from both the hot and cold faucets. Before turning it back on after 24 hours, unplug it from the wall. Allow the water temperature to equalize for around 5 to 6 hours before dispensing to check if it was successful.

Why does the water in my refrigerator keep coming in?

This can happen if the refrigerator is overfilled, which prevents air from circulating and keeps the fridge frost-free. Ice buildup may prevent water from draining from the refrigerator. The refrigerator must be de-iced by being turned off and allowing the ice to melt.


  • Trevor Eason

    I am Trevor Eason an entrepreneur, a designer, web developer, and software engineer currently living in Dallas, TX. My interests range from technology to photography. I am also interested in entrepreneurship, gaming, and basketball. I run my own Tech Win Reviews blog. Hope you will join me for all your Samsung and Tech Reviews and recommendations.

Sharing is caring!

Similar Posts