How to Get Local Channels on Samsung Smart Tv [ Your Guide To Get Local Channels]

channel 2

If you want free television shows, movies, sports, and news, there isn’t anything quite as good as the free channels that can be obtained using an antenna, even if you have a cable or satellite provider.

Despite the fact that there are a variety of options, both large and little, all of the best TV antennas connect to the television in the same way.

You may either set up over-the-air channels at the same time as you are setting up your television, or you could set up over-the-air channels at a later time.

Here’s how to go about it: 

how to get local channels on samsung smart tv
How to Get Local Channels on Samsung Smart Tv

See Also:

How to Turn on Samsung tv Without Remote

How To Clean a Samsung Tv Screen

How to Reset Samsung TV

How to watch local channels without having to pay for cable

Antennas for high-definition television

Purchasing a digital HDTV antenna is the most straightforward method of receiving your local television stations without the use of a cable box.

If you believe you’ll be purchasing an old piece of “rabbit ears” hardware to use for this feature, you’d better reconsider.

You can purchase an antenna that can be attached to a neighboring window, eliminating the need to walk onto the roof in order to install one.

It goes without saying that homeowners who wish to install a more powerful antenna on the roof of their home in order to improve reception and range have a variety of possibilities.

While the number of channels that can be received well on a digital HDTV will vary depending on where you live, the good news is that you should be able to receive up to 80 or more channels.

This is due to the fact that local television stations have been increasing the number of channels available to their translators.

Networks that broadcast reruns of classic television shows, such as MeTV, CoziTV, Comet, Heroes, and Icons, and others, fall into this category.

4K over-the-air television channels are the wave of the future.

You can not only receive your local broadcast channels in full 1080p HD quality right away thanks to these new antennas, but the best is yet to come.

Some cities in the United States have already implemented the new ATSC 3.0 broadcast television standard, albeit slowly and cautiously.

The new digital antenna will be available for purchase once it is completely operational, and it will be capable of receiving broadcast TV in full 4K quality, as well as Dolby Atmos or DTS:X audio compatibility, once it is fully operational Smart TVs from LG and Samsung, including the latest models, are already equipped with ATSC 3.0 tuners in advance of the full rollout.

I don’t have cable, therefore how do I access local channels on my Samsung Smart TV without using it?

1. Select the Source option from the drop-down menu.

To begin, go to the home menu and select the source icon, which is located on the far left of the screen.

Select television from the second option because it is the source of supply.

2. Connect your antenna to your computer.

If you do not have an antenna connected, you will be presented with a screen that says “No signal.”

Connect the antenna to the RF connector on the back of the television and select Channel scan from the menu options.

3. Select the source of information.

Determine the source of the signal’s supply (Air, Cable, or each). If you are using an antenna, pick Air to see if there are any free over-the-air channels.

4. Begin scanning for available channels.

Once you have started scanning, the television will cycle through every available channel and will automatically determine which ones are receiving a signal and which ones are not, depending on your settings.

5. Complete the configuration.

Once the scanning procedure has been completed, you can close the window and begin flipping through the channels again.

Separate channels are also added by Samsung below the television Plus channel.

These are live channels that broadcast via the internet, allowing you to watch live television even if you don’t have an antenna in your home.

6. Begin to watch live television.

The live television tile may be accessed from the ribbon menu after you’ve added your local channels.

After you’ve added your local channels, you’ll be able to enjoy all of your live TV rights from your home display screen by selecting them from the ribbon menu.

It is possible that you will also be able to drag up a guide of current programs, a channel list that allows you to edit channels as you see fit, and a scheduling supervisor that will allow you to look ahead to upcoming suggestions.

7. Make use of the channel navigator.

All of your live television alternatives will be fed into the channel guide, which will let you view what is currently airing and what is coming up in the future.

Please keep in mind that the program information may take some time to load.

Do smart TVs come equipped with built-in antennas?

Uploading free-to-air channels to a Samsung TV is simple. Because the virtual tuner is integrated, Samsung intelligent TVs may acquire a virtual broadcast without the need for a hard and fast-pinnacle container.

Remember that we are the most experienced users of antennas in Australia, thus we will not provide a guidebook on how to add channels through a cable company.

Will a Smart TV’s signal be improved by using an antenna?

With an antenna, you may improve the picture quality on your smart television.

Even if you join your antenna, the only other aspect to keep in mind is the location of the antenna on your vehicle.

If the sign is placed on the ground or is surrounded by barriers such as houses or buildings that are taller than the antenna, it may be unattractive and ineffective.

It is ideal for antennas to be installed on rooftops or in other high-traffic areas where there are few impediments.

How to Configure Over-the-Air (OTA) Channels on Samsung TVs from 2018

If you’re looking for free TV shows, movies, sports, and news, there’s still nothing quite like the free channels that can be obtained with a television antenna.

While there are a variety of sizes and shapes to choose from, all of the best TV antennas connect to the television in the same way.

Installing your antenna during the initial setup of your television, or configuring over-the-air channels at a later time, is entirely up to you.

Here’s how you go about it:

1. Select the Source option from the drop-down menu.

To begin, go to the Home menu and select the Source symbol, which can be found on the far left of the screen. Select television as the source from the secondary menu.

2. Connect your antenna to your computer.

If you do not have an antenna connected, you will be presented with the message.

“No Signal.” Connect the antenna to the RF connector on the back of the television and select Channel Scan from the menu bar on the remote.

3. Select the source of information. Choose the signal’s origination point (Air, Cable, or Both). If you’re using an antenna, you can pick Air to search for free over-the-air television channels.

4. Begin scanning for available channels.

Once you’ve started scanning, the television will cycle through every conceivable channel and automatically recognize which ones are bringing in a signal and which ones aren’t bringing in a signal.

5. Complete the configuration.

As soon as the scanning procedure is over, you can close the program and continue flipping through the channels.

Samsung has also added more channels to its TV Plus package.

These are live channels that broadcast via the internet, allowing you to watch a selection of live television even if you do not have an antenna.

6. Begin to watch live television.

Having added your local channels, you can access all of your live television straight from the home screen by selecting the Live TV tile from the ribbon menu on the left-hand side.

In addition, you will be able to access a guide of current programming, a channel list that allows you to edit channels as you see fit, and a schedule manager that allows you to look ahead to upcoming programs.

7. Make use of the channel navigator.

All of your live-TV options will be fed into the channel guide, which will allow you to see what is now airing and what is coming up next. Please keep in mind that the program information may take some time to load.

Samsung Smart TVs (models from 2014 to 2017)

There are several similarities between these instructions and the ones before, with the most significant change being the use of remote control.

1. Press the “Menu” button on your remote control. (The word “Settings” appears on the remote control of the 2016 model.)

2. In the menu, select “Broadcasting” (2014 model TVs may have “Channel” as an option instead).

3. Select “Auto Program” from the drop-down menu.

You’re finished as soon as the tweaking is completed!

Samsung’s non-smart televisions (All models)

These are all Samsung televisions that do not have an internet connection, and they include the majority of devices manufactured prior to 2014.

Samsung produces a large number of non-smart television types, much too many to provide exact model-specific instructions.

The instructions provided here should work on the vast majority of Samsung televisions, but there may be small changes depending on the model.

1. On your remote control, press the “Menu” button.

It will state “Menu” and have three boxes below it on many remote controls.

2. Select “Channel” from the drop-down menu.

(Some newer versions may have the word “Broadcasting” in the title instead.)

3. Select “Auto Program” or “Auto-Tune” from the drop-down menu.

4. Your television may prompt you to choose between “Air” and “Cable.”

If this is the case, pick “Air.”

This will inform your television that you are searching for antenna channels.

Using internet-based services, you can watch local TV channels

If you don’t want to deal with extra hardware like antennae or TV tuners to obtain your local television stations, the simplest option is to subscribe to an internet-based live TV service.

Several of them provide live access to all or nearly all of your local television channels.

Most also provide cloud DVR, which allows you to save live shows to your account. You can watch them on your computer, mobile device, or smart TV.

The main disadvantage of adopting this quick-and-easy method is that the monthly costs for these services might be costly.

Hulu Plus Live TV, which costs $65 a month and includes 50 hours of cloud DVR, is one of them.

YouTube TV, which also costs $65 a month but includes unlimited cloud DVR storage, is another choice (the recordings do disappear after nine months).

FuboTV is a bit cheaper, starting at $55 a month, and includes 500 hours of cloud DVR. However, not every local channel is available in every market.

Our Final Thoughts

Over-the-air (OTA) programming has gone a long way, with most local stations now broadcasting in high definition (HD).

To make matters even better, your TV has a tuner that can automatically scan for and program local stations that will appear on your channel list.

In addition, an antenna will help your TV find even more channels and increase signal quality.

Frequently Ask Questions

How Can I Get Local Channels If I Don't Have An Antenna?

If you wish to watch free-to-air channels, you must get an antenna.

You can, however, get a cable TV subscription or stream live. Here is a comprehensive list of the best ways to watch local stations without an antenna:

  • Get some cable.
  • Online viewing
  • Install major network applications.
  • Sign up for YouTube TV.
  • View on YouTube

How Can I Receive TV Signals Without a Cable or Antenna?

Sign up for live TV streaming services: A live TV subscription gives you the same experience as a cable membership without the hefty expenses. Subscriptions to YouTube TV, Hulu+Live TV, and SLING TV are available.

Get a Streaming Device: Look for an online streaming device to watch local cable programs on your smart TV. To have access to your channels, you may need to purchase an additional membership.

RUKU, Amazon Fire TV, Google Chromecast, and Apple TV are some of the gadgets that will meet your requirements.

Use the Smart TV as a streaming device: Because smart TVs can connect to your Wi-Fi network and have embedded software, you can easily access practically all streaming services and channels. As a result, you do not need to purchase streaming devices to view your local channels.

Is an Antenna Still Necessary with a Digital TV?

Yes, an antenna is still required with a Digital TV to receive a better signal.

Aside from connecting your antenna, you should think about where it will be placed.

The signal will be too weak to serve you if the antenna is surrounded by barriers such as houses and buildings or is placed on the ground.

The antenna will serve you best if it is positioned on a raised platform, such as a rooftop, and in areas with few obstructions.

Hi, I'm Khelly! Your random Island Girl! Life is complicated so, finding solution to your tech problems shouldn't be. Let me help you with that!????