Why Won’t My Samsung TV Turn On? (Easy Guide)

Why Won’t My Samsung TV Turn On? For some reason, most Samsung TVs eventually experience the same issue of simply not turning on.

There have been numerous reports of Samsung TV owners reporting this issue – some claiming it has been a problem for years!

Fortunately, there is a simple fix that should fix about 80% of Samsung TVs that won’t turn on.

SAMSUNG TV WON’T TURN ON

If your Samsung TV will not turn on, you must reset it to avoid black screen always. Unplug your television and wait 60 seconds. Press and hold the power button for 30 seconds while the TV is unplugged. After 60 seconds, reconnect your Samsung TV and it should work.

See Other Related Articles:

Where Are Samsung TVs Made? (Top Answered!)

Which Samsung TVs Have Bluetooth? (Simple Easy Guide!)

Why Does My Samsung TV turns off by itself and won’t turn back on? (8 Fixes)

Unplug the Samsung TV from the wall

While it may seem obvious, unplugging your Samsung TV from the wall socket is the most common way to turn it back on. The key here is to wait the entire 60 seconds. Have some patience and wait at least a minute before plugging it back in to finally watch the smart hub and apple tv.

Find and hold the power button red light on your Samsung TV for 30 seconds while it is unplugged. Check that you’re holding the power button on your TV, not the remote!

This helps to drain any remaining red light power in the TV and allows it to soft reset itself in order to fix the Samsung tv. This is not the same as simply turning the remote on and off! When you plug the TV back in after 60 seconds, it should power back up without issue.

While this solution should work in about 80% of cases, the remaining 20% may be more difficult. If you still can’t get your Samsung TV to turn on, try the solutions listed below.

Remove batteries from Samsung remote

If unplugging and replugging your TV did not resolve the issue, try removing the batteries from your remote. Make sure to remove both batteries from the remote. The key here is to wait the entire 60 seconds. Have some patience and wait at least a minute before plugging it back in.

Find and hold the power button on your Samsung TV for 30 seconds while it is unplugged on power supply. Check that you’re holding the power button on your TV, not the remote!

This helps to drain any remaining power in the TV and allows it to soft reset itself. This is not the same as simply turning the remote on and off! When you plug the TV back in after 60 seconds, it should power back up without issue in screen mirroring.

While this solution should work in about 80% of cases, the remaining 20% may be more difficult. If you still can’t get your Samsung TV to turn on, try the solutions listed below.

Remove batteries from Samsung remote

If unplugging and replugging your Samsung TV black screen did not resolve the issue, try removing the batteries from your tv remote. Make sure to remove both batteries from the tv remote.

After removing the batteries, hold down the power button on the remote for 30 seconds. Repeat for a total of 30 seconds! 30 seconds, not 10!

Replace the batteries in the remote and try to turn on the TV after the full 30 seconds have passed. It should be turned back on. You might want to consider replacing the batteries during this step just to be safe!

If either of the two steps above fix your Samsung TV power problem but then a few days or weeks later you run into the same issue, you’ll want to try factory resetting your TV for a more permanent solution to avoid standby mode.

How do I reset my samsung tv if it won’t turn on?

Factory reset Samsung TV

Click the Home button on your remote while the TV is turned on (hopefully, unplugging it or removing the remote batteries was able to temporarily power the TV). After that, navigate to Settings > General > Reset.

Then enter your security PIN (“0000” if you’ve never set one before). Your television will turn off and on again before displaying the initial setup screen. This will essentially return your Samsung TV screen to the settings it had on the day you bought it.

Factory reset Samsung TV without remote

If you don’t have access to your TV’s remote for whatever reason, you can still factory reset it by pressing the power button on your TV. Depending on the model, this may be located on the right, left, or very bottom of the device.

With the TV turned on, press the Menu button and then navigate to Settings > General > Reset. There are other options if you can’t find these buttons on your TV or if it’s mounted in a confined space.

To begin, consider plugging a USB keyboard directly into the back of your Samsung TV, which you can then use to navigate and reset your TV. If you have a Samsung Smart TV, you can also download the Samsung SmartThings app to your smartphone.

You can use your smartphone as a remote after connecting your TV to the app! Another option is to use a universal remote that you have lying around and enter the appropriate Samsung code for the remote to get it to work.

You should have fully resolved your power issues by this point, but just in case, I’ve included some additional steps worth trying before calling it quits.

Reseat power cord in back of Samsung TV

Unplugging the power cord from the back of the TV is another simple potential solution to your power issue. Unplug it for about 60 seconds before plugging it back in.

Make sure the connection is snug when you plug it back in! You don’t want this to be loose at all – a tight connection is necessary to ensure that the TV receives consistent power. Reconnect the power cord and turn on the TV using the TV power button, not the remote! Hopefully, the Samsung Led TV will come back to life.

Select the Correct Input Source

Because of an incorrect input source, your Samsung TV may appear to be turned off. For your TV to function properly, you must select the appropriate input source.

Check that your TV source/input matches the number of HDMI ports being used, whether you’re using a streaming device, DVD player, or cable box. In the following example, you would set the TV to “HDMI 2.” You can choose the appropriate input power source in two ways:

Method 1 – Enable Input Source using a Remote Control

• Turn on your TV
• Press the Source button on your remote control
• Select the desired input mode

Method 2 – Change Input Source without Remote Control

• Turn on your TV
• Press the MENU button on the side or bottom of the TV
• Use the volume button to navigate to the source option
• Press the menu button to select the desired input source

Note: Some TVs have a source button at the back or side that you can use to select your preferred input source

Try a different power outlet

While this is unlikely to be the cause, if you’re still having trouble, try plugging your Samsung TV into a different power outlet in your home. We don’t always notice when an outlet has a short or a blown fuse.

If you don’t want to move your TV, you could simply plug another smaller appliance into the same outlet you’re trying to use for your TV.

If you see that device turn on, you know that outlet is operational and that it is most likely not the source of your problem. Again, this is unlikely to be the cause, but it is a worthwhile troubleshooting step that should be eliminated as a suspect as soon as possible.

Backlight is broken

If nothing has worked up to this point, your Samsung TV’s backlight is most likely broken. To see if this is the case, turn on your television and then bring a flashlight very close to the screen capacitor.

When you flash the light, look closely to see if there is any image on the screen. If you see a picture but it’s extremely faint, it’s probably because your TV’s backlight has failed and needs to be replaced.

Motherboard is fried

If there was a recent storm, your motherboard could have been fried. Unfortunately, the only way to be certain is to remove the back paneling from your Samsung TV, where you’ll find a few boards – usually the motherboard on the left and the power board on the right.

To ensure that the problem is not with the power board, plug in your TV and turn it on, then detach the cable that connects the motherboard to the power board from the power board side. If the TV continues to light up, you know the power board is fine and you have a faulty motherboard.

Motherboards are pretty cheap to replace, just make sure you get the exact replacement by checking the numbers on the board itself. Or, if you’re not comfortable doing this yourself, go ahead and have a TV repairman assist you.

CONCLUSION On Samsung Smart TV Won’t Turn on

When it comes to power, Samsung TVs can be finicky. If your tv wont turn on samsung, try the following solutions in this order:

• Wait 60 seconds after unplugging your TV from the wall.
• Remove your remote’s batteries and hold the power button for 30 seconds.
• With or without your remote, factory reset your television.
• Reinstall the power cord in the back of your television.
• Check that your television is connected to the correct input source.
• Try plugging your television into a different outlet.
• Send the TV in for a new backlight.
• Send the TV in for a new motherboard.

If none of these fixes work you might want to pull up your warranty and see if it is still valid, otherwise you’re stuck buying a new TV. Let me know if this helped fix your Samsung TV. If you found success doing something else, leave me a comment down below!

FAQs On Why Won’t My Samsung TV Turn On?

Questions	Answers
Samsung Tv Needs To Be Unplugged To Start?	Samsung tv won’t turn on unless i unplug it, try unplugging it from the power source for a few minutes and then plugging it back in. This simple troubleshooting step can often resolve minor issues and get your TV up and running again.
Why My Samsung Tv Won’t Turn On?	If your samsung tv wont turn on, try these troubleshooting steps: 1) Ensure the power cable is securely plugged in. 2) Check if the outlet is functional by connecting another device. 3) Reset the TV by unplugging it for a few minutes. 4) Try a different remote or press the power button on the TV itself. If the issue persists, seek professional assistance.