How to Replace Water Filter On Samsung French Door Refrigerator? (4 EASY STEPS)

How to Replace Water Filter On Samsung French Door Refrigerator? The dreaded “dead filter” icon- a glaring red symbol marries your Samsung refrigerator’s otherwise beautiful face. You can ignore it; it will not harm the refrigerator. But who knows what’s swimming around inside that sloppy filter?

Besides, it’s like a chipped tooth: you can’t ignore it. If you’re anything like me, you might be apprehensive about changing the filter. Not to worry. I’ll demonstrate how.

These instructions are specific to the Samsung RS265TDRS. As a result, if you have a different model, the details may differ slightly. Some things, however, are universal, such as the necessity of first turning off the water in the unit.

VIDEO: How To Change The Water Filter In A Samsung Twin-Door Refrigerator?

HOW DO I CHANGE THE WATER FILTER IN MY SAMSUNG REFRIGERATOR?

• Have a spare correct filter on hand.
• Turn off the water supply to your refrigerator, which is most likely located under your kitchen sink.
• Locate the filter compartment in the bottom right-hand corner of the interior door.
• If necessary, remove the vegetable bin to gain access.
• Grip the ridge on the outward surface to remove the old filter or any Samsung water filter. It needs to be vertical or locked.
• Pull out after a quarter-turn counter-clockwise.
• Insert the new filter or fridge filter and turn it one-quarter turn clockwise to secure it.
• To purge air and impurities, run the water dispenser for at least 30 seconds.
• Hold down the water selector switch for three seconds to reset the filter light.

Have A Spare Filter On the Hand

The replacement filter comes first. You might be able to find one as close as your local home improvement store. However, you will not find the best deal there in the filter housing. 

If you choose my option, it may take a few days to get the replacements in your hot little hands, but ordering online saved me about 40%.

I believe that specialty sites have the best prices, but I went with Amazon.com because it was simple to use and nearly as cheap. I saved even more money by purchasing a three-pack.

You must have the part number. It’s in your manual, but if you have the RS265TDRS, you’ll need filter DA29-00020B.

With the door open, you’re looking at the bottom of the right-hand (refrigerator) section of the unit. The vegetable bin at the very bottom has been removed, and you are looking at the top of the filter on the lower right, facing you. That’s where they keep the thing hidden.

Turn Off The Water Supply To Your Refrigerator

Keep in mind to turn off the water filter light. The blurry, blobby thing in the center of the above photo is a shut-off valve. Search for yours. This one is under my kitchen sink, which is a popular spot. Look for likely candidates, turn them off, and check to see if the water dispenser is still working. Otherwise, you are ready to take off.

If the worst happens, you can always turn off the water at the meter. This is simple, but it may necessitate the use of a specialized tool.

Find the Filter

As the kids say, removing the filter head is “crazy simple.” Simply grasp the ridge on the outer surface. It should be vertical (the ‘locked’ position). Pull it out by turning it one-quarter turn counter-clockwise (to the left).

The instructions state that hard water can leave deposits on the filter, making it difficult to turn or remove. The recommended solution is to use more force. Really! Simply reverse the steps to install the new filter for drinking water.

Before Using, Run The Water

There’s only one major step left after you’ve installed the new filter head (and replaced the vegetable bin). Run the water dispenser for 30 seconds or more (the official video below says five minutes) to clear the system of any air or impurities. When I first ran the dispenser, a lot of air got in there and sprayed me with water. Better you than your dinner companion!

WHY SHOULD YOU CHANGE YOUR SAMSUNG REFRIGERATOR’S WATER FILTER?

Because who knows what yucky microorganisms might be swimming around in your water, your refrigerator water filter serves to filter out impurities and keep your water clean, safe, and of good quality and taste.

Aside from microorganisms, a good quality water filter will remove a high percentage of water flow treatment residues, herbicides, pesticides, drugs, asbestos, and other chemicals that may be present in your water flow.

Furthermore, you should change your water filter to prevent sediments from accumulating and clogging your water supply valve and/or ice maker, especially if you live in an area with hard water.

WHEN SHOULD YOU CHANGE YOUR SAMSUNG REFRIGERATOR’S WATER FILTER?

Knowing when to change the filter on your Samsung refrigerator is just as important as knowing how. When you see the red “Change Water Filter” indicator, you know it’s time to change your water filter.

This usually occurs before the filter’s fluid services capacity is reached (Samsung water filters have a capacity of 300 gallons before it has to be changed).

Even if this capacity is not reached, your water filter must be changed every six months. When it’s close to six months since the last change, or since you started using the unit, you can anticipate and begin preparing for the change ahead in the water filter cover.

Fortunately, your Samsung refrigerator or Samsung fridge has safeguards in place to assist you in remembering. When it’s almost time to change the filter, the light will turn purple, then red, and finally off.

Keeping this in mind will help you to ensure that your water is always a well-filtered refrigerator filter and of high quality.

CONCLUSION: Replace Water Filter On Samsung French Door Refrigerator.

If your Samsung refrigerator has an internal filter, an auto shut-off valve can keep the water off while you change the filter. Otherwise, do not manually turn off your water supply to avoid common installation issues such as airlocks and others. When you turn on the water supply again, the water either sputters or does not come out at all.

If your Samsung refrigerator has external filters, turn off the water supply before swapping the old water filter. These refrigerators will have an inline filter but no automatic shut-off valve. Only a tubing water line at either end connects directly to the water mains. As a result, disconnecting the water supply during filter swaps prevents flooding from this connection.

Frequently Asked Questions

Do you have to turn the water off to change a Samsung refrigerator water filter?

To make changing the wat. If you’re filter easier, turn off the water supply valve. Please keep in mind that sometimes disassembling the water filter is difficult because impurities in the water cause it to stick have trouble, grip the water filter tightly and pull hard.

Where is the water filter on Samsung refrigerator?

The Samsung French Door Refrigerator (RFG28MESL) is one of the company’s flagship products. As shown in the image below, the water filter is located in the refrigerator compartment, between the crisper drawers.

How many filters does a Samsung refrigerator have?

There are three types of Samsung water filters, so make sure you get the right one for your refrigerator. To begin, locate the filter in your refrigerator model of home appliances. The location will vary depending on your model, so if you’re unsure, consult your user manual.

How do I reset the filter on my Samsung refrigerator?

Press and hold the “Alarm / Hold for 3 seconds to Reset Filter” button to reset the indicator light. Hold the “Power Cool” and “Fridge” buttons simultaneously for 3 seconds if your model has an inside control panel. This will return the indicator light to its original blue state.