How to Reset Samsung TV? To perform a factory reset of your television may be the best solution when you are experiencing problems with your television.
The good news is that, while this is a possibility, it may not be necessary in all cases.
In addition, your television contains many built-in self-diagnosis capabilities that can assist you in resolving any issues you are experiencing with the signal, network, picture, or sound.
Note: If the methods above do not correspond to your television, go to the Download Center to obtain a copy of your television’s user manual.
Our quick Solution.
How to Factory Reset Samsung TV?
You can reset all TV settings (excluding the network settings) to factory defaults. Go to Settings, then General. Select Reset, enter your PIN (0000 is the default), and then select Reset. To finish the reset, press OK.
Hope this short answer help. Read the article for detailed instructions below
5 Things for Samsung Smart TVs to Reset Factory Settings
Here are the Signs to check before performing a Samsung factory reset:
- abnormal image, no picture, no TV channel or external device sound
- No sound or distorted sound, unwanted noise or interrupted video or audio playback
- Video, photos, or thumbnails do not display a black screen properly
- USB Playback, Throw, or Screen Mirroring
- The application works incorrectly
2 Methods to Reset Samsung Smart TVs
Soft and Hard Reset Samsung TVs
Is your Samsung TV stuck or freezing and you can’t view your favorite shows on it?
To get rid of this frantic issue, it’s best to restore your Samsung TV to its original settings.
By resetting Samsung TV with this common procedure, you’ll get your TV to perform just like previously.
This will ensure that all of the TV’s default settings are restored and works well.
When you reset a factory, all your settings return to factory defaults, including memorized channels and any configured clocks or timers.
If you have professionally calibrated your TV, you may lose calibration settings if the calibration is not done through the service menu.
5 Steps for a Soft Factory Reset Samsung TV without Pin:
1. Take remote control in your hand.
2. Hold down the ‘Power’ button.
3. Wait a minute till the process finishes.
4. Press and hold the power button again.
5. This absolutely turns on your Samsung TV.
8 Simple Steps to Perform a Hard Reset Samsung TV:
The following guide shows the SAMSUNG Smart TV master reset procedure.
Learn how to reactivate physical keys and reset settings.
As a consequence, your SAMSUNG Smart TV will look and perform like new.
Before doing so, however, you should remember one thing, all your personalized settings are gone.
You’ll lose all your recordings, tuned channels, and programs you’ve installed.
So, before you do a hard factory reset, you must try to solve the problem using a soft reset.
If the gentle reset doesn’t function well, you can hard reset.
1. Hold the Power key on your remote TV to power off your device first.
2. Then, to access the Main Menu, press the Menu button.
3. Using the Up and Down Arrows to navigate and the Enter key to confirm, select Support from the following list of alternatives.
4. Then hit Enter after navigating to Self Diagnosis using the Up and Down Arrows.
5. Select Reset in the following step.
6. The TV should then prompt you for a security code. 0000 is the default value.
7. When the warning notice appears, use the Left or Right Arrow on the remote to select Yes, then press the Enter key to confirm.
8. You did an excellent job! The factory reset procedure has just been completed.
3 Ways to Restore the Samsung Smart TV to its Default Black Screen Mode.
If you are experiencing a black screen on your television and are unable to watch any shows on it, you may wish to attempt the following troubleshooting procedures to resolve the problem:
Method 1: Check for Power Connectivity.
Users will encounter this issue if the power connecting wire is either too loose or not correctly inserted into the wall outlet.
Take care to ensure that all of the wires are properly connected in order to avoid being in this predicament.
Method 2: Double-check the Information
Check to see if your channel service-providing box is the source of the problem.
If you are watching with a DVD player, check sure that it is in proper working order before you begin.
Method 3: Reset Samsung Smart TVs
You can reset your Samsung TV by following these steps:
- Navigate to the ‘Menu’ area of your remote control.
- Select ‘Settings’ from the drop-down menu and press ‘Enter’.
- Then, pick Support> Enter > Self Diagnosis> Enter to complete the process.
- Now press the Reset key followed by entering.
- Enter the security PIN in the appropriate field and press the “Enter” key.
If this does not solve the problem, you may want to try updating the firmware on your television, disabling and enabling the Sleep mode, or seeking technical assistance.
How about Sound Resetting?
With this option, you can restore your sound-related settings to their factory defaults.
This includes things like Balance, Equalizer changes, TV installation type (wall/stand), HDMI audio format, Audio delay, and Auto Volume.
If you’ve made manual adjustments to the sound settings but are dissatisfied with the results, you can use the Reset Sound option to revert to the TV’s default sound settings, just as you can with the picture settings.
Resetting the sound settings has no effect on any other aspects of the television’s operation.
The default sound settings can be re-established by navigating to Settings, clicking on the Sound Settings icon, selecting Expert Settings, then selecting Reset Sound from the drop-down menu.
Restore the Smart Hub’s and Samsung Account’s Default Settings.
For those who own a Samsung Smart TV, performing a Smart Hub reset restores the TV’s settings to their factory defaults and completely deletes any information associated with the TV’s account.
Following a Smart Hub Reset, you will be required to reconnect your account to any services it was previously linked to and to re-establish Smart Hub service agreements.
Streaming apps that have already been pre-loaded on your device will continue to work, but apps that have been previously added to your My Apps viewing selection will need to be downloaded and re-installed.
To reset the Smart Hub settings, click to Settings > Support > Self Diagnosis > Reset Smart Hub. If you have any questions, please contact
The WiFi on the Samsung TV won’t Connect to the Internet.
Your Samsung TV may be unable to discover wireless networks (or may lose its network connection on a regular basis), which indicates that your TV is not properly linked to your home network.
There are a few factors that can contribute to connection problems, such as outdated software or the need to reset your smart TV.
Some difficulties, such as incorrect DNS settings on your router or a faulty MAC address, may necessitate the use of a little more specialized knowledge in order to be resolved successfully.
If this is the case, it may be prudent to consult with a local professional or contact Samsung to ensure that you do not cause any additional problems with your network.
Fortunately, the majority of them can be answered quickly and easily from home.
Before bringing in a professional, try the expert recommendations listed below on how to solve a Samsung TV’s internet or WiFi connection problem before calling.
6 Steps to Connect a Samsung Smart TV to a Wireless Network
In order to correctly configure a smart TV, you must first ensure that your network is properly connected.
Fortunately, Samsung made it really simple to access and configure the wifi on your Samsung Smart TV for the first time!
- Take your remote control and go to the Settings menu.
- Select the General option, followed by the Network selection.
- To open the network settings, select Open Network Settings from the menu bar.
- Choose your Wifi network from the drop-down menu.
- If prompted, enter the password for your network account.
- Select Done, followed by OK.
If you’ve already configured your network connection, you may also need to perform a network settings reset to ensure that everything is working properly.
Because home network setups and settings might change over the course of a TV’s ownership, your TV may require a network refresh from time to time in order to keep up with the times.
4 Steps to Refresh Your Samsung TV’s Network Setting
In order to perform a network refresh on your Samsung Smart TV, follow these steps:
1. To access the Settings menu, take your remote and press the Home button.
2. Navigate to the Settings > General > Network menu item on the left side of the screen.
3. Hover your cursor over the Reset Network option and select YES.
4. Restart your television set.
You should now be able to access your network settings and make any necessary changes.
What’s the Bottom Line?
The reset options supplied by Samsung for its televisions may be just what you’re looking for to get everything back up and running.
Nonetheless, before you perform any type of reset on your own or using the Remote Management feature, be sure to verify the following:
- Check that the physical connections are proper and that they are firmly fastened.
- If you have a Samsung Smart TV, make sure that your network/internet connection is working properly.
- Check to see if you have the most recent firmware update for your television.
- If your TV isn’t responding to your remote, try replacing the batteries and seeing if it starts working again with your television.
Note: Unplugging the television from the power source does not reset the television; instead, it simply turns it off. In the event that you plug the TV back in, it will restart as if you had used the remote to switch it off and on. A reset can be accomplished through the settings menu.
FAQs on Reset Samsung TV
What is the best way to reset the network settings on my Samsung Smart TV?
It is necessary to execute a hard reset on your smart TV in order to restore network settings.
This may be accomplished by browsing to the ‘Self Diagnosis’ part of the ‘Support’ menu of the TV settings.
It is during this time that you will be prompted to enter your PIN number and follow some on-screen prompts in order to restore your network settings.
Is there a way to restart my Samsung frame television if it won’t turn on?
To begin, unplug all of the cables from the television and press and hold the ‘Power’ button on the remote control for up to 10 seconds.
Following that, you must wait a few seconds before pressing the Power button a second time. In the event that it blinks and then does not turn on, there is a problem with the power source or the power connection plugged in.
What is the best way to locate the PIN for my Samsung Smart TV?
Samsung Smart TVs are protected by a four-digit security PIN, which is set by default to 0000. If, on the other hand, you have altered this PIN, the newly formed PIN will be accepted everywhere it is required.
Alternatively, if you have forgotten your PIN after updating it, you may need to reset your own pin.