Can’t Find Galaxy Buds Bluetooth? [ Best Solution]

Sharing is caring!

Finding the perfect pair of Bluetooth headphones can be a difficult and daunting task.

Now, add to that the task of finding a specific device and you’re in for an even bigger challenge. If you’re looking for the Galaxy Buds Bluetooth, then you’ve come to the right place.

This article will provide helpful tips on where to look and what to consider when searching for these sought-after earbuds.

image 166
Can’t Find Galaxy Buds Bluetooth?

How to Start Pairing Mode on Galaxy Buds

With Samsung devices, the Galaxy Buds setup procedure is exceptionally simple. The automatic pop-up prompt, which enables you to pair your headphones with only one tap, is entirely to blame for this.

Problems Connecting Samsung Earbuds

It merely takes a few simple steps to reconnect your Galaxy Bud series or Gear IconX earbuds if your phone is having trouble connecting to them. The problem is typically resolved by restarting the earbuds, resetting the Bluetooth connection, or updating the Galaxy Wearable software.

STEP 1

Prepare your Samsung earphones for connection.

Note: Avoid charging the earphones with a power source like a PC out of caution. This may result in a slower charge for the earbuds. Check read our tutorial if your earphones are connected but there are audio dropouts or other quality problems.

  1. Give the earbuds at least 30 minutes to charge.

Close the charging case’s lid after inserting the earbuds. Verify that the charging contacts are spotless and debris-free.

The USB charging connector on the rear of the charging case accepts a USB cable for connection.

  1. The other end of the USB cable should be connected to a charger adapter that has been certified by Samsung (available separately) and plugged directly into a power outlet. When the case receives power, the charging indicator will start to light up.
  2. Give the earbuds at least 30 minutes to charge.
  • Close the charging case’s lid after inserting the earbuds. Verify that the charging contacts are spotless and debris-free.
  • The USB charging connector on the rear of the charging case accepts a USB cable for connection.
  • The other end of the USB cable should be connected to a charger adapter that has been certified by Samsung (available separately) and plugged directly into a power outlet. When the case receives power, the charging indicator will start to light up.

Related Articles:

How To Find Galaxy Buds Case? [Follow These Easy Steps!]

Galaxy Buds Pro VS Airpods Pro: Ultimate Comparison

https://www.samsung.com/us/support/troubleshooting/TSG01111318/#:~:text=If%20your%20phone%20cannot%20connect,will%20normally%20fix%20the%20issue.

Why Won’t My Samsung Galaxy Buds 2 Pair?

Your Galaxy Buds 2 may not connect for a number of reasons, including:

  • difficulties with Bluetooth
  • Wireless signal sabotage
  • Short-term technological issues
  • Charge your Galaxy Buds before using them.

How Can I Fix the Connection on My Galaxy Buds 2?

image 167
Can’t Find Galaxy Buds Bluetooth?

To get your Galaxy Buds 2 to connect to your Bluetooth-enabled device, try each of these workarounds in turn.

  1. Analyze any interference. Wi-Fi routers, appliances, repeaters, and media systems can all interfere with and disrupt one another wirelessly. A other, more remote area is where you should place the device you want to connect to, such as your phone and the Galaxy Buds 2 earphones.
  1. Switch Bluetooth on and off (restart). Even if a Bluetooth device was previously connected or functioning well, it can occasionally act improperly. Wait for at least a minute after turning Bluetooth off before turning it back on. By doing this, the connection is reset, which might fix some more typical problems.
  1. Restart the computer. Your phone or tablet might need to restart occasionally to address issues, just like computers do. It cleans out the active memory and might fix certain straightforward connectivity problems.
  1. Delete the Bluetooth profile on your linked device and unpair the Galaxy Buds 2. The Bluetooth connection can then be repaired. Repairing the Galaxy Buds 2 Bluetooth connection can sometimes be the best choice and aid in establishing a new, more dependable sync.
  1. Try attaching the Galaxy Buds 2 to a different gadget. If the earphones connect to the second device without any issues, the fault most likely lies with the primary device that you were trying to connect. You now know the Galaxy Buds 2 are the issue if the connection issue persists.
  1. The Galaxy Buds 2 need charging. The Galaxy Buds 2 earbuds’ battery level might be too low to enable a strong connection. Make sure there is no dirt, debris, or hair on the charging contacts on the earphones or in the wireless charging case. Always use a charger or adapter that has been approved by Samsung. Before attempting to link them, let the earphones and case charge for at least 30 minutes.
  1. Reset your Galaxy Buds 2 gently. The wireless charging case should first be filled with the Galaxy Buds 2 earphones before the top is closed. Wait for a power cycle to occur after 7 to 10 seconds. To automatically connect the earbuds with a device you’ve already paired, reopen the lid, put them in pairing mode, or remove them from the case.
Recommended:  What Is Safe Mode On Samsung Phone? [Answered]

Note: Before restarting, we advise charging the Galaxy Buds 2 earphones and wireless charging case to at least 15% or more. It has to be charged if the charging case’s red light is on.

  1. The Galaxy Buds 2 were factory reset. You can perform a factory reset to restore all software settings to their defaults if you’ve tried all the other solutions and your Galaxy Buds 2 is still refusing to connect. Your earbuds will need to be re-paired with each of your devices.

Import: Use the Galaxy Wearable app instead of the iOS counterpart, which is required. You’ll need access to an Android tablet or phone, preferably a Samsung model, as there is currently no method to factory reset the earphones on an iPhone or iOS device.

  1. Consult the Samsung Support Center for assistance. You’ll need to consult the specialists if you’ve tried all of the solutions mentioned above and nothing has worked. Find your model number to find a representative to talk with, call, or submit an online service request. Samsung also provides a support manual that includes instructions for resolving connection problems with Samsung earphones.

The Best 7 Methods for Resolving the Samsung Galaxy Buds Not Connecting Issue

image 168
Can’t Find Galaxy Buds Bluetooth?

1. Switch Off Your Device

You can start by restarting the device you’re attempting to connect to. Although it may seem easy, doing this almost always helps. It’s likely that a background activity or program is obstructing the connection process and causing this failure.

Therefore, you should try restarting your device to see if that helps before attempting advanced remedies.

Recommended:  How Do I Record On My Samsung Phone? [Follow this 3 Easy Steps!]

2. Get Other Bluetooth Devices Off Pairing

While the majority of contemporary smartphones and computers are capable of connecting to many Bluetooth devices at once, the capacity of your device may vary depending on the Bluetooth module it is outfitted with. Therefore, before reconnecting your Galaxy buds again, unpair any unnecessary Bluetooth devices from your phone or computer.

The steps listed below can be used to unpair Bluetooth devices from your Android.

  • On your phone, open the Settings app from the app drawer. then select Bluetooth under Connections.
  • Unpair can be done by tapping the gear-shaped symbol next to a Bluetooth device. To confirm, select Unpair once more.

The steps listed below can also be used to unpair Bluetooth devices from your iPhone.

  • Go to Bluetooth in the Settings app on your iPhone.
  •  A Bluetooth device’s information icon should be clicked on. When prompted, tap the Forget This Device option and choose Forget Device.

You may also get rid of unwanted Bluetooth devices from your computer. After removing them, try connecting your Galaxy buds to your computer or smartphone once more.

3. Take Your Galaxy Buds Apart and Re-Pair Them

If your Galaxy Buds are already paired and you’re still having difficulties connecting with them, you can try unpairing and repairing them.

To accomplish this, insert the earphones into the charging case, then secure the lid. Then go to Bluetooth settings by opening Settings on your phone. Select the Unpair option by tapping the gear-shaped symbol next to the Galaxy Buds.

See if your Galaxy Buds can connect now by trying to pair them once more.

4. A Different Device Can Be Tried First

If the problem still exists, try pairing your Galaxy buds with another smartphone or, if accessible, a PC. This will allow you to determine whether the problem is with the device you’re attempting to connect to. If the connection is successful, you might need to reset your device’s network settings in order to resolve the Bluetooth problems.

5. Gas up the Galaxy Buds

Low battery life may prevent the Galaxy Buds from connecting to a device, whether one or both are affected. Samsung advises charging the battery to 100% before using the earbuds for the first time or if it has been a while since you used them.

So, insert the earbuds inside the case, and then snap the top shut. Before using your Galaxy buds again, attach a USB cable to the case and charge them for at least 30 minutes.

6. Galaxy Buds with Factory Reset

You can attempt factory resetting your Galaxy Buds to start again if the connection between them and your handset keeps failing. It will unpair your Galaxy Buds from all of your devices, but it’s highly likely that this will fix the problem.

Recommended:  How to Fix Unable To Connect To Samsung Server?[Full-Guide]

Note: All music on the Gear IconX’s headphones is deleted when the device is factory reset.

  • Go to the Earbuds settings in the Galaxy Wearable app on your phone.
  •  Click Reset by scrolling down. When prompted, press Reset.

7. Check for Earbud Software Updates

You can check for any outstanding software updates if you’re using the Galaxy Wearable (or Samsung Galaxy Buds or Galaxy IconX) app on your device. These updates frequently include a wide range of software enhancements and bug fixes, some of which may address connection problems.

  •  Go to the Earbuds settings in the Galaxy Wearable app on your phone.
  •  Click on Earbuds software update by scrolling down. Automatically, the app will begin looking for updates.

If there are any pending software updates, download and install them. Similarly, you may update your Galaxy Earbuds using a computer.

Linked Up Again

Although using genuine wireless headphones has its benefits, you’ll occasionally run into connectivity problems. You’ll be able to resolve the problem most of the time on your own. In the unlikely event that the aforementioned fixes don’t work, you can try contacting the Samsung Support Center for additional help.

Conclusion

In conclusion,it is clear that the Samsung Galaxy Buds Bluetooth can be hard to find, but they are well worth the effort. Finding them online is often the best option as many retailers may not carry them in-store. Additionally, many certified resellers offer discounts on refurbished models which might be another avenue to consider when searching for these earbuds. Consumers should also keep an eye out for sales or promotional offers which could help to save money when making a purchase.

FAQS

How can I force my Galaxy Buds to pair?

After inserting your earbuds, secure the lid of the charging case. Open the case after 5–6 seconds have passed. The Bluetooth pairing mode will be automatically entered by the earbuds. Put them in your ears and hold both touchpads for a few seconds until pairing mode activates them if they are already attached to another device.

How can I reset my Samsung earbuds manually?

Your Samsung earphones require a factory reset.

For Galaxy Buds+, Live, Pro, and 2, tap Earbud settings, then hit Reset. Finally, tap Reset once again to confirm. Tap About earphones on your Galaxy Buds. Hit Reset earbuds once to confirm, and then tap Reset again.

What caused my Galaxy Buds to malfunction so suddenly?

Earbuds can become unresponsive for a variety of reasons, especially if they are wireless. They are nearly always repairable, whether the issue is with the Bluetooth range, battery life, audio settings, dust or debris, or any of a plethora of other features.

Author

  • Trevor Eason

    I am Trevor Eason an entrepreneur, a designer, web developer, and software engineer currently living in Dallas, TX. My interests range from technology to photography. I am also interested in entrepreneurship, gaming, and basketball. I run my own Tech Win Reviews blog. Hope you will join me for all your Samsung and Tech Reviews and recommendations.

Sharing is caring!

Similar Posts