How To Reset Filter Light On Samsung Fridge? Solved!

How to Reset Filter Light on Samsung Fridge? Most Samsung refrigerators are equipped with filter light indications, which alert the user when the water filters needs to be changed.

It also means that after replacing the filter in the Samsung refrigerator, you will need to reset the filter light in the appliance.

But why is this the case?

Generally speaking, the maximum number of months that a water filters can be used is six.

Table of Contents

Troubleshooting: Issues on Resetting Filter Light

Issue	Solution
The filter light is on, but you have not changed the filter.	Check to make sure that the filter is installed correctly. If it is installed correctly, the filter may need to be replaced.
The filter light is on, and you have changed the filter.	The filter reset button may not be working properly. Try pressing and holding the filter reset button for 3 seconds.
The filter reset button is not working.	The filter reset button may be broken. You may need to contact Samsung customer service for a replacement filter reset button.
The filter light is still on after you have changed the filter and pressed the filter reset button.	The filter may not be compatible with your samsung fridge’s. Check the owner’s manual to make sure that you are using the correct filter.
The filter light is still on, and you have tried all of the above solutions.	There may be a problem with your samsung fridge’s. Contact Samsung customer service for assistance.

Here is a quick method to try to reset your water filters.

Key Takeaway:

Press and hold both buttons for 3-5 seconds to reset the filter light on a Samsung refrigerator. Green or blue, depending on the model, can be the color of the light. If ice production and water pressure from the dispenser are still functioning normally, the filter does not need to be replaced.

How to Reset Filter Light on samsung fridge’s?

Press the “Alarm / Hold down for 3 seconds to Reset Filter” button to reset the indicator light. If your refrigerator has an inside control panel, hold down the “Power Cool” and “Fridge” buttons for three seconds. This will restore the indicator’s blue color.

However, depending on the type of water that passes through the waterline, it may be necessary to replace the waterline.

Consider that if the water is hard in your area, you may need to replace the filter within 3 to 4 months of installing it.

You will not be able to determine that your filter needs to be changed until you notice a difference in flavor, which you would not notice without the filter light.

Your water filter indicator will turn red after 6 months or 500 gallons of water have been used.

When you notice this red light, it’s time to replace the water filters.

The longer you wait, the more likely it is that you will see particles in your drinking water.

Furthermore, you will need to change your water filter more frequently than every 6 months if you live in a region where there is excessive limescale in the water supply.

Indicator for the Presence of a water filters

In order for the water filter indicator light to turn orange after five months or 450 gallons of water, then red after six months or 500 gallons of water, it must first turn orange.

The color of the light depends on the model you have. It might be either green or blue.

It is necessary to locate the multi-function button(s) on your display that controls the water filters indication in order to restore it to its default setting.

Then push and hold the button(s) for a few seconds until the light turns green.

Exemplifications of Various Models

NOTE:

The models depicted in the photographs below are only a few samples of a variety of designs.

You should examine your refrigerator’s display screen and seek characteristics comparable to these.

Reset the filter light on a Samsung refrigerator’s (steps to follow on different models)

Quick Tips: Samsung filter reset

If accessible, locate the Filter Reset button on the control panel.
1. Once the correct button is discovered, press and hold it for three seconds until the light resets.
2. When the filter icon is reset, it will either turn off or return to its usual color.

When using a Samsung refrigerator’s, you must hold down the FILTER RESET button for approximately two seconds in order to turn off the red filter icon on the door.

Samsung filter reset

If you are unable to locate the FILTER RESET button on your refrigerator – which is typically located on the dispenser controls – consult your owner’s manual for assistance (on the front of your refrigerator’s).

Resetting Filter Light On Samsung Fridge

In order to operate other models, you must press and hold down either the “WATER FILTER” button or the “ICE/WATER” button for three seconds.

Now, because the Samsung refrigerator’s water filters reset technique differs from model to model, we’ve explained the correct Samsung refrigerator’s water filters reset approach for each model in the following sections to help you get back on track (typical steps).

How to reset filter on samsung fridge’s?

Samsung refrigerator’s Model RF28K9070SR has a filter reset.

To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for approximately 3 seconds after turning it off.

The filter indication will be reset as a result of this action.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

The CRUSHED/HOLD button on your RF23J9011SG/AA must be held down for three seconds in order to reset the water filter light.

The color of its indicator should transition from red to OFF instead of staying on.

Steps for resetting the water filter on a Samsung refrigerator with a French door design Samsung refrigerators, such as the Samsung refrigerator’s RF260/BEAESR/AA, are available.

After installing a new water filter, press and hold down the ALARM/HOLD option for three seconds to turn off the red warning light that has shown.

Please keep in mind that, for devices with internal controls, you must push and hold down the buttons FRIDGE+POWER COOL (at the same time) for a total of three seconds.

How to reset filter light on Samsung refrigerator’s

Model DA29-00003G of the Samsung refrigerator has a filter reset light.

To reset a replacement warning light, press and hold the ALARM/HOLD button for three seconds while the light is off.

Model number RF24R7201SR/AA of the Samsung refrigerator.

If you have recently replaced the filter in your Samsung RF24R7201SR/AA refrigerator, pushing and holding the FILTER RESET button (for 3 seconds) should turn off the reset signal on the refrigerator’s.

Samsung refrigerator water filter reset RF28K9070SR/AA

The CRUSHED ICE button must be pressed and held down for three seconds to clear the water filter message.

RF23J9011SR is the Samsung refrigerator’s filter reset code.

If you have a Samsung refrigerator’s with model number RF23J9011SR, press and hold the “CRUSHED/HOLD” button for three seconds to reset the water filter alarm.

RF263BEAESR is the Samsung refrigerator filter reset code.

The following procedure should be followed if your RF263BEAESR Samsung refrigerator water filter does not reset automatically:

Press and hold the ICE TYPE/WATER button on the controller for three seconds.

Instructions for resetting the Samsung RF28R7351SG water filter (applies to most 4 doors of Samsung refrigerator’s)

The CRUSHED LIGHT INDICATOR button must be pressed and held down for three seconds in order to reset the warning signal.

If the reset light signal does not turn off, there are some other options to attempt.

In a nutshell, if replacing a new filter did not result in the red light turning off, you can also attempt the following:

Check to see whether any of the buttons are locked.
Make certain that the buttons are truly “unlocked,” or else the Samsung refrigerator filter reset operation will not function properly.

For the methods on how to unlock the controls, you can refer to your handbook book once more if you require them.

Ensure that the filter seating is correct.

It is possible that the filter alarm light is still blinking because the newly installed filter was not properly placed. Open the door, look at the fitting, and make sure it’s exactly in place.

Check to see that the proper filter was installed.
If you did not use a legitimate product, the light notification may not go away, and you may need to swap out the replacement filter to get it to work again (as a last resort).

What Are The Ways To Reset Filter Ways On Samsung Fridge?

CONCLUSION

We hope you have better understood how to reset the filter light on a Samsung refrigerator (and probably you have already gotten rid of the warning).

One last point to mention: most Samsung refrigerator models are equipped with a “LOCK” button, which is used to lock the controls, and it is frequently this button that is at fault when the samsung fridge’s filter light does not turn off when you try to turn it off.

It will be necessary for you to unlock the controls in order for the water filter light to be successfully reset; thus, try to hold down the flashing LOCK button for 3 seconds and then retry the process quality.

Naturally, the unlock technique varies from model to model, so if the steps outlined above do not work, consult your handbook for the right approach.

FREQUENTLY ASK QUESTIONS

Question	Answer
How do I reset the filter light on my Samsung fridge?	To reset the filter light on your Samsung fridge, follow these steps: 1. Locate the filter reset button. It is usually located on the inside of the fridge, near the water filter. 2. Press and hold the filter reset button for 3 seconds. 3. The filter light should turn off.
The filter light on my Samsung fridge filter is still on after I changed the filter. What should I do?	If the filter light on your Samsung fridge filter is still on after you changed the filter, try the following: 1. Make sure that the filter is installed correctly. 2. Press and hold the filter reset button for 3 seconds. 3. If the filter light is still on, contact Samsung customer service for assistance quality.
Where can I buy a replacement filter for my Samsung fridge?	You can buy a replacement filter for your Samsung fridge filter at most major retailers, including Home Depot, Lowe’s, and Best Buy. You can also purchase a replacement filter directly from Samsung.
How often should I change the filter in my Samsung fridge?	You should change the filter in your Samsung fridge filter every 6 months. However, if you have a family of four or more, you may need to change the filter more often.

How do I turn off reset filter?

Replace the charcoal filter and press down on the words “Reset Filter” for 3-5 seconds to turn off the reset filter light. Unplug the gadget for a few minutes and try again if this does not work.

Why is the red filter light on my Samsung refrigerator?

The red filter indicator on a Samsung refrigerator indicates that the water filter should be replaced. After five months or 450 gallons, this light becomes orange, and after six months or 500 gallons, it goes red. To turn off the light, it is necessary to replace the water filter quality.

After changing filters, how do you reset the filter light?

After changing the filter, pushing and holding the ‘Reset’ button for three seconds will reset the filter light. The light may be green or blue depending on the model.

Why does my refrigerator still say to replace the filter?

The refrigerator’s light is not connected to the filter and operates for a period of six months. Even after changing the filter, the light may remain on. As you screw or press the filter into the receiver, check that it forms a good seal. This will ensure that the filter is properly placed. If the new water filter is properly installed and the filter light remains illuminated, you must manually reset the water filter light quality.

References:

Khelly Perez

Samsungtechwin | + posts

Hi, I'm Khelly! I am your tech expert for all your Samsung Products and Information needs. Let me help you find solutions to your tech problems. Follow me.

How To Reset Filter Light On Samsung Fridge? Solved!