If your ice bucket becomes stuck and refuses to come out, don’t try to force it.
A simple jiggle should be sufficient to shake it loose.
If you’ve never removed an ice bucket before, don’t worry: most have a trick to them, such as a certain angle to pull at, that makes the job much easier.
Some variants also include a button or lever for releasing the ice bucket.
Let’s Start With, How Does the Samsung Fridge Ice Maker Work?
1. To begin the cycle, an electromechanical solenoid controls the flow of water.
A solenoid is moved by applied current, causing the valve to open.
2. The valve is opened in about seven seconds, allowing just enough water into the mold to fill it.
3. After filling the mold, the machine waits for it to freeze.
The temperature of the water inside the molds is measured by an inbuilt thermostat.
When the thermostat reaches a certain temperature (9 degrees Fahrenheit), an electrical switch is closed.
When this switch is closed, a heating coil beneath the icemaker is activated.
After the bottom of the ice mold is heated, the ice cubes dislodge from the mold.
5. After that, an electric circuit activates the motor, which produces ice. During the movement process, each cube is linked to the next.
6. The blades are pushed through notches on the front, and the ice cubes fall into an underside container.
7. Before the cubes are pushed out of the icemaker, the cam lifts the shut-off arm.
As a result, the ice maker will not fill up the entire freezer; it will just produce more cubes as needed.
Why Isn’t Your Samsung Refrigerator Ice Maker Producing Ice?
1. Samsung ice maker is turned off: If your Samsung refrigerator ice maker is not dumping ice, turn it off.
Then, start with the simplest factors.
If the ice machine is turned off, it may not work. External ice dispensers will display a dark icon when the ice maker is turned off.
In order for the ice maker to work, you must click and hold the symbol for 3 seconds.
It will activate the Ice On icon as well as the ice machine.
2. Inadequate refrigerator water pressure: An ice maker requires water pressure to produce ice.
To test your water pressure, pour 10 seconds of water into a measuring cup.
If less than 75 percent of a cup of water is dispensed, there may be insufficient pressure.
3. Clogged filter: Due to low water pressure, Samsung refrigerators with clogged filters may not produce ice. Replace the filter every six months to avoid blockages. You should clean your ice maker every time you change your filter.
4. Frozen water in the supply line: In some situations, leftover water in the supply line freezes. As a result, the Samsung refrigerator cannot produce ice because it is too small or unusually formed.
How to Disassemble a Samsung Ice Maker
To remove the ice maker from a Samsung refrigerator, follow these steps:
The first step
Check to see if the ice machine is frozen.
It will need to be thawed.
Put the refrigerator in forced defrost mode to accomplish this.
The button combination to utilize for this is determined by the model of your Samsung refrigerator.
However, for most people, pressing the Energy Saver and Fridge buttons simultaneously for roughly 8 seconds and then pressing the Fridge button three times more until the Fd display appears puts the machine into forced defrost mode.
Leave it in this mode for about 10 minutes before turning it off.
To do so, hold down the same buttons and the Fridge button until the screen goes blank and the beeping stops.
The Second Step
If you are unable to reach the power source, disconnect the refrigerator from the power supply or trip the circuit breaker.
The Step three
Remove the ice bucket by grasping it at the bottom at the opening, lifting it slightly, and gently drawing it out.
If there is any extra ice in the ice maker compartment after removing the bucket, melt it by keeping the door open and allowing it to defrost.
It is not recommended to use a heat gun or a hairdryer for this reason since it may harm the plastic, which cannot be restored.
The Step Four
Remove the wire-covering housing by unscrewing the Philips screw that holds it in place.
Lift the cover-up and away from you to remove it.
Pull the ice maker’s wiring from the compartment’s side.
Remove the electrical plug by depressing the clasp that holds it in place.
The Step Five
Remove the Philips screw that was keeping the ice duct tray in place.
Pry the tray to the right and carefully pull it down with a flat blade screwdriver.
If your Samsung refrigerator model includes an ice maker with a cooling coil built into the bottom, move it to remove the ice maker.
Pry the coil down from the top with a flat blade screwdriver, allowing you to slip the ice maker out.
The coil will not move.
Be cautious with the coil so that it does not become punctured.
If you do, the unit will be destroyed and will not be repaired. And, before you remove it, make sure there is no ice on it; all of the ice must melt.
To remove the ice maker from the coil’s top, press down the top clip to lock it in place, then pull it forward a bit and push it down.
This separates the ice maker from its housing.
How Do I Remove the Ice Maker From My Samsung Refrigerator?
On a Samsung refrigerator, how do you remove the ice maker?
There are only six basic steps to take. You will then be a master in this profession.
Step 1: Defrost the Samsung Ice Maker
To remove ice from a Samsung refrigerator, defrost it manually.
Keep the door open to allow the ice to melt fast, then turn off the unit. Ice can be removed from an ice maker using this procedure.
You can also use the forced defrost setting to defrost the refrigerator.
To use this feature, hold down the Lighting and Freezer buttons for roughly 12 seconds.
The screen will eventually go black.
Press the Lighting button four times to compel the device to defrost.
The machine will beep every 15 to 20 minutes as it defrosts.
Use this approach to remove ice from an ice machine.
With a hairdryer, you can quickly defrost the ice. This procedure is not recommended since the heat may damage the unit’s plastic.
Step 2: Disconnecting the Ice Maker on a Samsung Refrigerator
Remove the power plug from the fridge or trip the breaker if the power source is out of reach.
Step 3: Remove the Ice Bucket from the Samsung Refrigerator
Is it possible to remove the ice bucket from a Samsung refrigerator?
This is how you do it. Gently remove the ice bucket by grabbing it beneath the opening and lifting it slightly.
After removing the bucket, keep the refrigerator door open for several minutes to defrost any residual ice. In this instance, you should avoid using a heat gun or hairdryer because they can harm the plastic and are irreversible.
Step 4: Remove the Cover from the Samsung Ice Maker
By opening the freezer door, you may remove the Samsung ice maker lid.
Unscrew the Phillips screw that keeps the housing in place with a Phillips screwdriver.
After that, apply a little pressure to lift the ice maker’s cover-up. You should not push or force it too hard to avoid harm.
Step 5: Remove the Ice Maker Tray from your Samsung refrigerator
If your Samsung refrigerator does not have an ice maker tray or an ice cube tray, you will need to defrost it to allow the ice to thaw.
There are two options for defrosting it: manually or with the forced mode.
Remove the Philips screw that keeps the ice duct tray in place.
To remove the tray, use a flat-bladed screwdriver and pull it down gently with your fingers.
To remove the ice maker from a Samsung refrigerator with cooling coils located at the bottom, remove the coil.
Pry the coil down with a flat blade screwdriver to remove the ice maker. This coil will remain in place.
It is critical to avoid puncturing the coil. If you do this, you will be unable to fix the unit. Additionally, before removing it, ensure that any ice on it has melted.
Step 6: Disconnect the ice maker from the refrigerator
You may remove the ice maker by pressing down on the top clip of the coil, moving it slightly forward, and then drawing it down.
This allows the housing to be isolated from the ice machine.
If your ice maker has been severely damaged and has to be replaced, you’ll discover the greatest Samsung ice maker right here.
How to Reset the Ice Maker on a Samsung Refrigerator
For Type 1 models that do not have an ice maker or are equipped with two, the following procedures should be followed:
1. Locate the ice maker:
To perform a Samsung ice maker reset, you need first to look at the back-left corner of the freezer and the top of the refrigerator.
The presence or absence of a cover on your ice maker is dependent on your model. Essentially, it appears to be a white box that hangs from the ceiling of the freezer.
2. Press the reset button:
The reset button, often known as the test switch, is found on the majority of models.
Before, the ice maker was equipped with a reset button located either under the front or at the back.
Then, once you’ve located the reset button, press down on it (you should apply some pressure here) until the ice tray motor begins to torque, and then release the button.
Type 2 – For models that have a heated tray, see the following:
1. Locate the Ice Bucket:
The ice bucket can be found on the left side of the refrigerator, at the top.
The bucket should be pulled out by first grasping the latch release on the right side of the bucket and squeezing it to release it.
2. Locate the ice maker reset button on the right side of the device.
The ice maker reset button is a rectangular, clear rubber button that is located on the right side of the appliance.
Press and hold the reset button for a few seconds until the process is complete.
Type 3 – Refrigerators with ice makers that are mounted at the bottom of the refrigerator.
1. Identify the location of the ice maker.
For example: After you’ve opened the freezer, check the back-left corner and the ceiling to make sure everything is in working order.
You may or may not have a cover for your ice maker, depending on the type you have purchased. Essentially, it appears to be a white box that hangs from the ceiling of the freezer.
2. Determine the location of the reset button:
A reset button may be situated on either the front or underside of the machine’s motor housing.
It is important to press and hold the reset button until the ice tray motor begins to rotate and then release it to complete the process.
3. You must wait at least 24 hours before proceeding:
When Samsung refrigerator ice makers are reset, it can take up to 24 hours for the results to appear.
As a rule of thumb, your ice maker should not be reset more than once per 24 hours.
If your vehicle was manufactured in 2010 or later, you will hear a chime sound as the reset process begins.
Holding the reset button for 10 seconds before releasing it will work on models from 2009 and earlier.
Check to see that the ice bucket has been completely reinserted.
Our Final Thoughts
Yep, when we heard removing the Samsung ice maker, we became confused.
Because sometimes we think that doing it is complicated.
But luckily here are the solutions for you!
Frequently Ask Questions
Is it possible to repair a Samsung ice maker?
Send us a message to receive assistance with your ice maker issue from our Samsung Care Pro. Choose an ice maker symptom and try one of our helpful troubleshooting guides.
If you are unable to address your issue, please contact us and we will gladly arrange for help.
What is the location of the reset button on a Samsung ice maker?
The reset button is placed on the front of the ice maker, just past the front cover, underneath the motor housing.
Press and hold the reset button (some pressure is required here) until you hear the ice tray motor begin to torque, then release.
Why is it that my Samsung ice maker produces only smashed ice?
The freezer temperature is too cold, which is a common cause of the ice maker delivering crushed ice exclusively.
If the freezer temperature is too low, the ice extracted from the ice maker will shatter. Increase the temperature of the freezer.