What Does 4c Mean on Samsung Washer? [2023](Answered)

What Does 4c Mean on Samsung Washer? If your Samsung front load or top load washer displays the incorrect error codes 4C 4E or NF, you must figure out what’s wrong before you can fix it.

If your Samsung washer detects a water problem, it will display these error numbers.

NF and 4E indicate that there is no water feed and that the washer is not filling.

This indicates a problem stopping your washer from obtaining water through the water inlet valve.

NOTE: These error numbers indicate a problem with water entering the washer.

Check the water hoses at the back of the washer to ensure they are not crimped or bent before proceeding with significant troubleshooting.

This also applies to error codes 4E, 4C, and NF.

Straighten or replace the water hoses if they are worn. Examine the filter mesh in the water inlet valve for clogging.

See Also:

How to Fix samsung washer 4c code [Solved! 5 Solutions]

What does UR mean on Samsung washer?

How to clean your Samsung washing machine

What does sud mean on Samsung Washer?

What Does The Code 4c Mean On A Samsung Washer?

The code 4C on a Samsung washer typically indicates a water supply issue. It means that the washer is not getting enough water or the water supply is not reaching the machine properly. This could be due to a blocked or kinked water hose, low water pressure, or a malfunctioning water inlet valve.

Error code 4C in a Samsung washing machine

The error code 4C or 4E indicates that your washing machine has discovered a problem with the water supply.

This could indicate that your Samsung washing machine is unable to produce water owing to a clogged or kinked water supply pipe.

And when that happens, you won’t be able to hear or see the water flowing through the washer’s door glass.

It should be noted that the 4C fault code might occur both at the start of the washing operation and when rinsing.

In the end, the soapy water is fully drained, and no pure water flows.

Causes of the 4C error code

Here are a few reasons why you can encounter a 4C error:

• The system is devoid of cold water.
• The water inlet valve could be clogged with debris or a foreign object.
• There could be an issue with the hot and cold water hookups. This could occur when
• connecting to the water supply system.
• The water delivery system has no water pressure or no pressure.
• The hose is not linked to the detergent container.

4 Steps To Check the 4C Error

Step 1: Examine the water supply hoses.

If there is a problem with the water supply, it is possible that the water pressure is not as high as it should be.

This usually indicates that a water supply hose at the back of the washer has become bent or obstructed.

When this happens, the washer does not receive enough water and shows the problem code 4C or 4E. Water pressure to the washer should be between 0.5 and 8 bar.

How do I inspect the washer’s water supply hoses?

1. Unplug the washing machine from the wall.

2. Slide the washer forward to gain access to the washer’s back.

3. Examine the water supply pipes to ensure that they are not broken, twisted, or clogged.

4. Straighten up any bent water lines or replace them with new hoses.

Step 2: Examine the water supply valve.

Check that the water supply valve at the wall to which the water hoses are connected is fully OPEN.

If the water supply valve is not fully open and is unable to give water to the washer, not enough water enters the washer, and the error message appears.

To ensure that the washer receives the entire amount of water required, completely open the water valves, both hot and cold.

Step 3 – Examine and clean the mesh filter.

Remove any junk from the water hose mesh filter so that water can flow freely.

(HINT: The water hose mesh filter is situated between the water hose and the washer’s connection.)

Step 4 – Inspect and clean the washer soap dispenser drawer.

If a blockage is discovered in the washer soap dispenser drawer, the 4C error notice will be shown.

Remove the dispenser drawer and clean it in the sink with hot water.

Step 5 – The inside of the water inlet valve may be obstructed.

There is a loose electrical wiring connection, or the solenoids are not working.

If you believe the water inlet valve is broken or has a loose connection, open the washer to obtain access to the valve.

First, turn off the electricity. Check that the wire harness is properly linked to the water inlet valves.

Check that it is secure and not slipping. If the wire connection is connected to the water inlet valve, the water valve or valves may have a damaged or malfunctioning solenoid.

You might now test them with a multimeter or simply replace them, or both.

Step 6 – Examine the Water Pressure

The following step is to test the water pressure.

The water pressure in your washing machine must be at least 10 pounds per square inch for it to function (psi).

When the water pressure falls below that level, your washing machine may be unable to fill with water, and the 4C error code will appear.

If you have a water pressure gauge, you may check the pressure yourself by attaching the gauge to the faucets and reading the measurement.

You can also phone your water utility company and inquire about your psi level.

Step 7 – Reset Your Washer

After completing all the preceding steps, reset your washing machine and check to see whether the error code is no longer displayed.

To reset your washing machine, simply do the following:

Unplug the washer for a couple of minutes before plugging it back in.

Turn on the washing machine and check to see if the 4C error code has been removed.

If your washer continues to display the problem code, you will need to call a skilled expert to inspect it.

Repair and Resolve your washing machine’s problem.

As previously stated, codes 4E and 4C signal that your washing machine is not receiving enough water, which is typically caused by a problem with one of the washer’s hoses.

The faults may also appear as nF or 1 4C depending on your model.

Fortunately, there are certain actions you may take to assist your washing machine fills up again.

The mesh filter screens in your washing machine may be clogged.

Turn off the water supply, unhook the water supply hoses, and then gently wipe the filter screens with a toothbrush or other similar little brush.

While the water supply hoses are disconnected, inspect them for kinks or clogs.

Reattach the water supply hoses and ensure that the hot and cold hoses from the faucets are linked to the proper water inlets on the washing machine.

Then, turn on the water supply and ensure that it is fully open for both the hot and cold water lines.

Make sure the drain hose is correctly inserted and secured.

The problem could be caused by a loose or poorly placed hose.

The drain hose should not be put more than 6 inches into the drainpipe and should not be airtight.

If the dispenser drawer is dirty, you should clean it as well.

If your top-load washing machine isn’t receiving enough water but isn’t displaying a 4E or 4C error, you can add more water to it by running a different cycle.

You have the option of using the Deep wash or Deep fill cycles.

If the error persists, please contact Samsung Support to request a service.

Keep in mind not to remove the screw on the back of the washing machine that keeps the drain hose against it.

If the screw has been removed, replace it and the holder with any screw that will fit. If the holder is not present, service is necessary.

What should you do if trouble code 4E or 4C persists?

If cleaning the dispenser drawer did not solve the problem, your washing machine may have a more significant problem.

If your equipment continues to display the 4E or 4C code, it may require service.

There could be a problem with the water supply or setup, a clog in the hose, or a problem with the solenoids.

If this is the case, we always recommend hiring a professional washing machine repairman to inspect and service your appliance.

This allows them to guarantee that your home is in accordance with industry standards.

They may need to evaluate the washing machine, hose, and connections, as well as the water pressure and how your equipment has been connected.

Our Final Thoughts: What does 4c mean on a samsung washer

When there is a problem with your washing machine, it will display an error code or a flashing light to inform you.

If your washing machine is unable to fill with enough water to complete a cycle, the 4E and 4C error codes will show.

This is frequently caused by the hoses on the washing machine.

Questions	Answers
What does 4c mean on my samsung washer?	The “4C” error code on your Samsung washer refers to a water supply issue. It indicates a problem with the water supply valve or the water pressure. To resolve this, check the water hoses for kinks, ensure the water valves are fully open, and examine the water pressure in your home.
What Does It Mean When My Samsung Washer Says 4c?	When your Samsung washer displays ‘4C’ error code, it indicates a water supply issue. This error commonly occurs due to a low water pressure or a problem with the water inlet valve. Check your water supply, ensure proper water pressure, and inspect the valve to resolve the issue.

Frequently Ask Questions About What does 4c mean on a washer?

How can you resolve Samsung washer error code 4C?

The mesh filter screens in your washing machine may be clogged.

Turn off the water supply, unhook the water supply hoses, and then gently wipe the filter screens with a toothbrush or other similar little brush.

While the water supply hoses are disconnected, inspect them for kinks or clogs.

What is the significance of the 4C on my Samsung washer?

4C or 4E is an error number that indicates that your washing machine has discovered a problem with the water supply.

This could mean that your Samsung washing machine isn’t producing water because of a clogged or kinked water supply pipe.

How can I troubleshoot dishwasher error 4C?

Examine the water inlet valve, which is responsible for filling the dishwasher with the correct amount of water.

It may become trapped in a closed position by accident, preventing water from flowing into the dishwasher. Turn the valve clockwise and then counterclockwise to fully open the passage.

The 4C error should be gone.

What does 4c mean on a samsung washing machine? (ANSWERS)

What does code 4c mean on samsung washer? (Guide)

Samsung washer 4c code reddit

What is 4c on samsung washer?