What does UR mean on Samsung washer [2023]

Samsung washing machines are among the best available, and many homeowners prefer them because of their dependability.

However, difficulties can still occur, and a variety of error codes appear on the digital display, which is difficult to decipher.

The error number “UR” is one of the most commonly encountered on Samsung devices, but what does it actually mean?

A Samsung washer with the ur error code samsung washer indicates that the unit is unbalanced and has to be balanced again.

This code can arise if the washer is placed on an uneven surface, or if the drum is overfilled with clothes, like in the example above.

Samsung washer Ur error code
What does UR mean on Samsung washer?

Troubleshooting: Issues and Solutions

Error code 5C or 5EIndicates that the washing machine has detected a drainage issue. Try cleaning the drain pump filter and cleaning the drain hose. If the issue persists, contact a Samsung service technician.
Washing machine does not fill with enough waterMake sure that the water supply is turned on and that the water inlet hose is not kinked or clogged. You may also need to adjust the water level setting.
Washing machine buttons do not workCheck to see if Child Lock is turned on. If it is, turn it off. You may also need to replace the washer’s control panel.
Washing machine is leakingCheck for any leaks around the washer’s door, hoses, or seals. If you find a leak, tighten the connections or replace the damaged parts.
Washing machine will not spin or will not stop spinningCheck to see if the washer is overloaded. If it is, remove some of the laundry. You may also need to clean the washer’s filter or replace the drive belt.

What does UR mean on Samsung washer [2023]

It is also possible for the samsung ur code to show if the drive belt has been broken or if the electrical motor brushes have become worn out.

Even though there are numerous Samsung washing machine error codes, not every one of them indicates a serious problem.

A ur code on samsung washer may simply indicate that you need to remove a portion of your laundry load from the drum, which is not uncommon.

Now, let’s take a closer look at what the UR symbol represents on a Samsung washer and what you can do to resolve the problem.

Related Articles:

What does sud mean on Samsung Washer?

Samsung Washer Warranty: What you need to Know

How to Reset Samsung dishwasher


UR is an error code on a Samsung washing machine that stands for “unbalanced and retrying,” and it’s a very typical problem code.

This code appears on the digital display of Samsung washers, and it can be difficult to understand if you haven’t seen it before.

In fact, not every Samsung washing machine model exhibits the UR code, with certain models showing the code UE instead.

Don’t be concerned, however, because a samsung washer code ur does not necessarily indicate that there is a problem with your washing machine.

Samsung washer ur code

When the washing surface is uneven, the laundry is loaded incorrectly, or the drive belt is damaged, Samsung washers frequently display the UR code.

The washer displays the UR code to ensure that the problem does not recur and that you do not cause harm to the washer.

Recommended:  How To Pull Out Samsung Refrigerators? (Easy Guide)

In addition to 3C, which signals that the washer is not draining, there are numerous other Samsung error codes to be aware of.

ur code Samsung washer

The UR code is not the most serious fault that your Samsung washer can encounter, but it is necessary to identify the source of the problem.

What are the possible causes of a UR Error?

In most cases, this error occurs as a result of imbalanced loads, but it can sometimes indicate more serious difficulties, such as issues with bearings or tub supports, or something between the drum and the surrounding tub.

Number 1 Cause: Incorrect laundry balance.

Incorrect load of laundry into washing machine

Given that this is almost certainly the most prevalent reason for the UR issue, it should be the first item to look for.

Before starting the spin cycle, the washer should rotate the drum back and forth slowly to ensure that the launch is distributed evenly across the drum.

If this is not achievable, you will experience an imbalance, which will result in vibration and, ultimately, the UR error.

The Causes and Solutions for Improper Laundry Balance

There are a variety of reasons for wrong laundry placing or uneven laundry laying, including the following:

If the load is insufficient, either add extra laundry to the machine or choose a program with fewer spins to accommodate the situation.

There is too much laundry in there: remove part of the laundry to keep the load under the maximum permissible volume and weight restrictions.

If you are washing shoes without a bag, remove the footwear and place it in a dedicated shoe bag.

Mixing materials that absorb water in different ways: avoid mixing these since the more absorbent items will be heavier than the less absorbent items (hold more water).

When washing a mixture of little and large items, manually distribute the items so that they are more evenly distributed.

As the laundry spins, it begins to ball up; straighten out the crumpled things so that they do not become balled up and heavier on one side.

Press the Start/Stop button to terminate the current program and turn off the washing machine before doing any of the procedures listed above.

Remove the filter for a moment to allow any remaining water to escape, then replace it.

ur code samsung washer

If none of the difficulties listed above appear to be the source of the error code UR, remove all of the laundries and run a short program without any laundry or detergent to rule out those possibilities.

If you continue to receive the UR error number, you may be confident that one of the washer components, rather than your laundry, is to a fault.

There are a variety of other reasons for a persistent UR issue, including:

Number 2 Cause: Uneven Surface on the Floor

Washer Dryer Rubber Floor Mats 600img 61d3981b8d398 2022 01 4

When the washing machine is placed on an uneven floor, the load may be unevenly distributed, which is especially noticeable when the washer is attempting to spin.

If necessary, you will need to relocate the washing machine to a more level region of the floor or place something between the washing machine and the floor to level things out.

Number 3 Cause: It is faulty

Turn off the washing machine and wait 15 minutes before turning it back on.

It’s possible that the problem was caused by a single digital controller failure in isolation.

It’s possible that it sensed an imbalance when there wasn’t one in reality.

If you are still receiving the UR error and the drum is only rotating in one direction, it is possible that the control circuit board is malfunctioning and transmitting incorrect orders.

Depending on the situation, you will either need to replace the entire unit or solder any blown components.

Number 4 Cause: The machine’s inclination is measured in degrees

Another possible cause of the UR error code is even more straightforward than the last one – the machine is not at the proper angle with the floor.

Fortunately, because the load is not evenly distributed within the drum, it is only necessary to adjust its feet from underneath and tilt the washer to its ideal horizontal position.

Recommended:  How to Retrieve Deleted Texts on Samsung Without Computer?

The majority of manufacturers provide adjustable feet at the bottom of their products.


Putting your machine on an empty spin cycle will likely not solve the problem if it continues to make a grinding noise or shake excessively.

This indicates that the bearings are failing.

These are the components that ensure that the drum rotates smoothly and properly at all times.

If they are damaged, in addition to the error code that appears on the display, there may be oil that remains on the floor.

There is only one solution to this problem, and that is the installation of a new bearing.

Drive Belt

515Llo5c1zL. SL1500 300x163img 61d3981bd73db 2022 01 4

It is a type of belt that is used to drive a vehicle.

A torn belt on your machine can also result in the UR Error being triggered.

This causes the washer to be unable to spin the drum at the proper speed. Result: The belt may be quickly and simply changed.

Transducer with a high rate of change

It is possible that your machine is operating OK, but that the UR Error code is displayed on the screen, which indicates that there is an issue with the sensor that is in charge of controlling the drum rotations. As a result, the transducer will very certainly need to be replaced.


Another possible cause of the imbalance is the failure of the casing or springs, which suspend the drum and aid in its normal operation, as well as the failure of the vibration dampers.

If there is a problem with any of these components, you will be able to hear noise and vibrations even.

Correcting the Samsung washer error code ur

The moment your washing machine begins to vibrate excessively, it is imperative that you pay close attention.

You must assist your machine in redistributing its load in order to avoid collateral damage and maintain its pristine condition.

Often, a single large item might cause the drum to tilt, resulting in excessive vibration, and you must assist it in doing so.

1. Remove the shipping materials from the area.

Check for shipment bolts in your washing machine if you notice any vibrations when using it.

Shipping bolts are usually recognizable by the words “FRAGILE” or “HANDLE WITH CARE” stamped on the container.

It is possible that these bolts, which were intended to tie the appliances to pallets during shipping, are still rattling about inside the washer drum as it fills with water.

ur on Samsung washer

If you come across one, remove it before continuing with the next load of washing.

2. Load must be balanced or reduced.

It’s possible that you’re dealing with an unbalanced load if your Samsung washer displays an error code.

To put it another way, there are either too many or too few clothes articles inside the machine. The idea is to distribute the weight of the load more evenly over the entire structure.

It is important to ensure that your load is not overburdened, as this might also result in a machine problem.

ur on Samsung washer

When you load the Samsung washer, make sure that the items are separated by type of fabric and that they are dispersed evenly throughout the machine.

Also, make certain that the machine is properly balanced by placing a level on top of it and checking for unevenness.

If you’re having trouble maintaining balance during the spin cycle, look at your load first.

A load that is uneven as a result of having too many objects in it can result from overloading the washer.

During the spin cycle, the washer revolves around its center of gravity in order to obtain a balanced result. Run a tiny load to put this theory to the test.

In the case of a small load, there should be no issues, but an excessive amount of content could cause damage to the equipment.

2. Ensure that the washer is at the proper level.

During a spin cycle, if your Samsung washing machine is swaying, check to verify if the machine is level.

In order to maintain balance, the first step is to ensure that all four legs are in strong touch with the floor – if you’re working on a carpeted surface, this could throw things off.

Recommended:  How To Prevent Samsung Refrigerator From Freezing? [Easy Steps to Follow!] (2022)

If the Samsung washing machine continues to rock after you have verified that it is level, check to see that all of the legs are properly fastened and are not the source of the problem.

When a washer is placed on a pedestal, it is usual for it to tip forward.

Top-loading washers can still tilt forward and cause doors to open, even though their legs are properly adjusted to level.

In the case of top-loading washers that are mounted on a pedestal, the problem may be magnified.

This is readily remedied by tilting the washer forward and then lowering it to the floor again. Front-loading washers self-level by raising or lowering one of their legs, as seen in the illustration.

3. Shock Absorbers That Aren’t Working Right

One of the most common reasons for a washer to start shaking or vibrating and generate the Samsung washer Washer Ur Error Code is a set of malfunctioning shock absorbers in the machine.

Washing machines often have two to four shock absorbers, which work to limit the amount of movement that is transferred to the rest of their respective machines.

The shock absorbers allow the drum to spin and move freely without causing any vibrations in the other sections of your washing machine.

If you have experienced a shaking or vibrating sensation when using your front-loading washer, it is possible that the shock absorbers have become broken.

Shock absorbers are located within the inner workings of the washer, and replacing them is not a simple do-it-yourself project.

It is advised that you seek the assistance of a specialist to resolve this situation.

4. The tachometer has failed.

In your washing machine, the tachometer is the mechanism that maintains track of the speed at which it spins, ensuring that it does not cause damage to the machine or injure a member of your family.

When a tachometer malfunction, the washing machine will no longer be able to spin quickly enough to effectively clean your clothes.

If you notice weird noises coming from your washing machine during the cycle, it is possible that something has gone wrong with the tachograph.

5. Drum bearing that has become worn out

A malfunctioning motor or a set of loose drum bearings are the most common reasons for front-loading washing machines to have vibration problems.

The tub spindle must be removed and disassembled in order to replace the bearings, which is a time-consuming process.

Samsung Washer Ur Code Reset

To reset the UR code on your Samsung washer, follow these steps:

1. Turn off the washer and unplug it from the power source for a few minutes.

2. Plug it back in and turn it on.

3. Press and hold the Start/Pause button for 5 seconds to reset the code. This should clear the UR code and allow your washer to function normally again

Our Final Thoughts

Washing machines have been manufactured by Samsung since 1993, and the company is well-known and trusted around the world.

However, despite their well-deserved reputation for dependability, you may encounter an error code from time to time.

The UR error code is one of the most frequently seen, but fortunately, the underlying reason for the error is usually one of the most straightforward to resolve.

All you have to do is follow the procedures outlined above.

Frequently Ask Questions

What does UR mean on a Samsung washer?UR stands for “Unbalanced Load.” This samsung washing machine ur code indicates that the washer has detected an unbalanced load during the spin cycle. This can be caused by a number of factors, including overloading the washer, uneven distribution of laundry, or a problem with the washer’s suspension system.
How to fix samsung washer ur code
Putting too many items in the washer and overloading it can cause the issue. Removing a few items should resolve the error code. As mentioned above, large, heavy items are also often responsible for the UR code. Untangling or redistributing the load or adding similar items to balance out the load should fix the issue.

What is the best way to fix an uneven Samsung washer?

If you have the space, transferring an unbalanced Samsung washer to even ground is the quickest and most effective solution.

In order for the washer to stand balanced and even on the floor, you may need to manually adjust the legs.

Alternatively, you can inspect the machine’s inside to ensure that the drive belt or motor brushes are not damaged, and if they are, you can replace them with new ones.

What is the procedure for resetting a Samsung washer?

If you have an issue with a Samsung washer, you may reset it by simply turning it off and unplugging it from the wall.

Unplug the Samsung washing machine and allow it to sit for between 2 and 5 minutes so that it can be reset.

If you plug the machine back in and switch it on again, the error code should disappear unless there is an issue with the machine.

What is causing my washer to not complete the spin cycle?

If the drain pump is impeded by debris or becomes clogged, your washer may not be able to complete the spin cycle.

Check the drain pump with a flashlight to see if there is any major obstruction that is preventing it from spinning properly.

It may be necessary to use a device, such as a thin hose, to snake the material out if the debris is too deep to reach with your hands.


Samsungtechwin | + posts

Hi, I'm Khelly! I am your tech expert for all your Samsung Products and Information needs. Let me help you find solutions to your tech problems. Follow me.

Similar Posts