What Does Samsung Stove SE Error Mean? (Simple Guide)

Sharing is caring!

🙋‍♂️ What Does Samsung SE Error Mean? Did your oven just have this error come up? You wonder, what is all this code weird code? It can be frustrating. Let’s help you resolve it.

The SE error code is one of the most prevalent problems, and it appears whenever your oven fails to respond to commands.

Here is what the Stove SE Error Means?

The Samsung SE error code indicates a shorted key in the keyboard area. It can also be caused by a fault control panel/board or a temperature sensor detecting that the oven’s temperature is rising higher than the normal rate

Troubleshooting: Issues in Stove SE Error in Samsung

This article we will dive into the details of the problem and offers solutions to consider each time these error codes appear.

What is the solution to the SE on my range?

Remove the range from the outlet and tighten any loose wiring connections between the oven electronic control board and the control panel. Replace the control panel and wire harness assembly if the connections are secure. Replace the oven’s electronic control board if the problem persists. Look for error codes on the stove display.

See Other Related Articles:

• What Does Samsung Refrigerator ff Code Error? [Click Here]
• What is Samsung Oven Steam Clean? [Answered]
• How To Fix Samsung Freezer Door Handle Broken? (See Here)

What is the SE error?

A shorted key generates the SE error code. It’s not as simple as that. For many Samsung modWhat is the SE error?els, E27 indicates an open oven sensor, whereas E28 indicates a shorted oven sensor. The resistance of the oven temperature sensor can be used to confirm both of these things.

Similarly in Samsung stove error codes

According to a SE/5E error warning on a Samsung ceramic hob’s display, the control panel sensor has been on for too long.

What about a stove? How can you reset it?

The Power button can be used to restart the cooktop. If the problem persists, turn off the power for 30 seconds (either by unplugging or turning off the circuit breaker), then turn it back on.

Samsung range se error fix

Unplug the range and tighten any loose electrical connections between the electronic control board in the oven and the control panel. Replacing the control panel and wire harness assembly if the connections are secure. Replace the electronic control board in the oven if the problem persists. Look for error codes on the cooktop’s display.

What causes the SE error?

The SE error on a Samsung can be caused by a variety of factors. It can be caused, for example, by a short circuit and related problems of:

• The control board; the touchpad; and the wire that connects everything

Before you begin the repair, you must first reboot the device by turning off the power for a few minutes and then turning it back on.

If the SE fault has gone away, you can continue to use the unit; if it hasn’t, you’ll need to check each of the three elements with a tester one by one. A change in the indicators indicates a breakdown.

HOW DO YOU GET RID OF THE SE ERROR CODE?

1. Using a dry cloth, wipe down all of the household gadgets.
2. Using a moist sponge or towel, wipe the surface clean.
3. Remove any water or food drippings from the stove.
4. With a multimeter, check the contacts and solder them.
5. Remove the faulty element and replace it with a new one.

For example, a printed circuit for a stove with an oven costs between $ 130 and $ 160, depending on the model. Only in this circumstance will the stove’s SE fault not be displayed.

List of Stove Errors

How do I fix the SE error?

1. The oven is not heating (E08).

Check the elements inside the oven by unplugging it. One or more of your oven’s heating elements may be malfunctioning. The temperature sensor, as well as the broil and baking elements, are included. You should also inspect the wiring and have it fixed as soon as possible if it is broken.

2. E-OA- Overheating in the oven

With older appliances, this is a common Samsung Error code. Check the temperature sensor and make sure the oven is unplugged. The resistance should be 1080 ohms, and if the resistance is greater than 200 ohms, the temperature sensor should be replaced.

3. E27 and E28- Temperature sensor problems

Disconnect the temperature sensor and unplug the main oven from the switch. Make sure the resistance is 1080 ohms. If the resistance is high, you should think about getting the sensor replaced.

4. Defective key (SE)

This error number will appear if any of the keys on the control panel are defective. Unplug the oven and double-check that the wiring between the control console and the electronic control board is in good working order. Replace the control panel if the wire harness appears to be in good condition but the problem persists.

5. Low Voltage Error (LE)

Check for any loose wires and make sure the oven is unplugged. Replace the transformer if any wires are damaged or if the transformer is destroyed.

What should I do if none of the solutions work?

If none of the solutions work for Stove SE Error, you can try resetting your oven by unplugging then plugging it again. If the problem persists, you can replace the oven’s electronic control board. I hope this helps!

Our Final Thoughts

The SE error in the Samsung oven is a common cause of the unit behaving badly. It either does not respond to orders at all or begins to “cook” stuff on its own.

FAQs on Oven Error Issues

References:

• What is the meaning of the error codes displayed on your Samsung cooktop
• What Does Stove SE Error Mean? [Answered!]
• Samsung range or wall oven error codes

Sharing is caring!