When your refrigerator‘s cooling system fails, you must have it repaired as soon as possible to protect the items stored inside.
An excellent example is the FF error code on an LG refrigerator, which indicates a problem with the freezer fan.
While Samsung produces some of the world’s best-selling refrigerators, they are not without flaws.
If you’re wondering, “what does Samsung refrigerator code ff mean?”
Then this guide is for you.
What Does The FF Error Code On An LG Refrigerator Mean?
Mode of demonstration
Also, how do I remove the error code from my Samsung refrigerator? In the event of a power outage, your Samsung refrigerator will display the errors 1E and/or SE. If this is the case, simply hold down the power save and lighting buttons for 10 seconds to clear the error. Alternatively, press the fridge and freezer buttons simultaneously for 10 seconds to reset the control panel and clear the error code.
The presence of an FF error code indicates that the unit has detected a problem with the freezer fan. Frost buildup can sometimes cause this.
How to Defrost Your Refrigerator Manually Unplug the unit and empty the ice bin of all food and ice.
Why did my Samsung refrigerator enter demo mode?
This is a common cause of Samsung refrigerator failure, and it may be impossible to reset. To try to resolve the problem, press and hold two buttons at the same time. The POWER FREEZE and ENERGY SAVER mode buttons must be held together for 5 seconds to exit demo mode.
When you see the FF error code on your LG refrigerator display, it means the freezer fan is broken. The evaporator fan in your freezer is particularly vulnerable.
The evaporator fan is essential because it helps to distribute cold air to where it is needed. In your freezer, for example, the fan will drive cold air to all corners of the compartment, ensuring that all of your food items are evenly frozen and will remain that way for as long as they are stored inside the unit.
See Other Related Articles:
How to Fix Samsung Refrigerator Error Code 41? (Solved!)
What is Samsung Refrigerator Error Code 5e? [Answered]
What Is Samsung Refrigerator Error Codes 88? [Answered]
Causes and Solutions for the FF Error Code
An ice buildup around the affected fan, a failed fan motor, or a faulty main control board are the most likely causes of the FF error code. This section will assist you in understanding each of these possibilities and what you can do to resolve them.
1. Ice Buildup Near the Fan
What it is: The evaporator fan repeatedly turns on and off. When the freezer becomes too hot, it will activate and distribute cold air throughout the compartment. However, once the temperature is reached, the fan will turn off until it is required again.
The fan blades must always be free to turn without being obstructed by anything.
How it fails: Over time, ice and frost can accumulate around the evaporator fan. This typically occurs when warm air and moisture enter the compartment, such as when the door is left open for an extended period of time.
As the ice accumulates, it will eventually obstruct the path of the evaporator fan blade. When this happens, the fan blade is unable to turn, resulting in the FF error code that you see.
How to fix it: The best way to remove an ice buildup is to let it thaw naturally. You can accomplish this by emptying the freezer and leaving the door open while the LG refrigerator unit is turned off.
Remember that depending on the size of the ice buildup, this process can take a long time.
2. Evaporator Fan Motor Failed
What it is: The evaporator fan is powered by a fan motor, which cycles on and off as needed to keep the freezer at the desired temperature. The fan will turn and blow cool air as expected whenever it receives electrical power and signals from the main control board.
The electrical evaporator fan motor can fail as a result of an electrical fault or from excessive wear. An electrical surge, such as that experienced during a thunderstorm, can, for example, cause the motor to short out and stop working.
Aside from that, any obstruction to the fan blades (such as the ice buildup mentioned earlier) will make the motor work harder than usual. If this continues for an extended period of time, the motor will experience excessive wear and eventually burn out.
How to fix it: If an evaporator fan motor fails, it must be replaced. To ensure your safety, always unplug your LG refrigerator before performing any repairs.
Then, begin by emptying the freezer compartment and removing the panel at the back of the compartment.
To begin, remove the fan blades from the motor. The screws that hold the motor in place should then be unthreaded. You can now detach the motor’s electrical connector after you’ve freed it.
At the same time, look for any signs of damage on the fan blades. Assume the fan blade is still in good condition. You can then reuse it with the new motor as well.
Then, replace the old motor and reattach the fan blades. Finally, firmly reconnect the electrical connector to the motor.
3. Defective Fridge Control Board
It is as follows: The main control board is arguably the most important component of your refrigerator. It’s a printed circuit board (PCB) with a slew of tiny components attached to it, each of which controls a different function of the appliance.
In addition to sending power and signals to other fridge components, the board receives signals to ensure that all components are functioning properly.
How it fails: Your refrigerator’s main control board can fail completely (i.e., everything stops working) or only in certain functions. Other fridge functions, for example, may continue to function even if the ones in charge of the freezer fan fail and generate the FF error code.
This type of failure is almost certainly the result of an electrical fault, such as a short circuit, which causes the affected components to overheat and burn. The same thing can happen if moisture or excessive heat gets into the main control board’s compartment.
How to fix it: Whether the main control board has failed completely or partially, it must be replaced. Begin by turning off the power to the appliance and locating the board’s compartment at the back of the fridge.
Then, remove the screws that are holding the panel in place so that you can remove it and access the main control board. The board is secured with clips and is linked to several wire harnesses.
First, disconnect the wire harnesses. Then, remove the clips that are holding the board in place.
Install the new board in the same manner as the previous one, and reconnect all wire harnesses.
Finally, replace the panel you removed earlier.
How Do I Remove The FF Error Code?
Once you’ve resolved the root cause and the freezer fan is working properly again, the FF error code will be cleared.
After troubleshooting and repairing the issue, you can reset the refrigerator to clear the error code.
How do you know if your Samsung refrigerator needs to be reset?
When a reset is required, Samsung refrigerators typically notify users by displaying error codes on the screen.
If the refrigerator detects that ice production has ceased, it could be due to a sensor error (8E), a freezer error (14E), or a fan error (40E, 40C). When the fridge enters Shop/Demo Mode, it will display the temperature bars OF OF, O FF, OFF OFF, or scrolling temperature bars.
Furthermore, refrigerators may fail to deliver the correct temperature or may even display an incorrect temperature display.
Precautions in General
If you’re determined to reset your Samsung refrigerator, make sure you’re doing it correctly. Before doing anything to the fridge, unplug it from the power outlet. Also, refrigerators contain noxious gases within the compressor, which should never be tampered with.
At SmartHomePerfected, we always advise readers not to do any work that they are not competent to do, and if in doubt, it is best to seek the help of a professional.
Because each Samsung refrigerator model is unique, if the troubleshooting steps below do not work, you can access the user manual for the specific model here.
How to Reset Your Samsung Refrigerator’s Power Source
Users may discover that their refrigerators have begun to malfunction from time to time. This can happen as a result of a series of sudden power surges, a power outage, or heavy storms.
A Samsung refrigerator may suddenly begin displaying the incorrect temperature instead of the factory temperature. Users should remove any food that has been stored inside.
- If all other options have been exhausted, a power reset can return the refrigerator to its factory settings.
- Using the “Power Button,” turn off the refrigerator.
- Look behind the refrigerator for the power cord and unplug it.
- Turn off the refrigerator for a few hours.
- Reconnect the refrigerator.
- To reactivate it, press the Power Button.
- The refrigerator should now be operational.
BONUS: How to Reset Your Samsung Refrigerator from Demo/Shop Mode
The Shop/Demo mode has a specific function. When a Samsung refrigerator is on display in a store before it is purchased, the retailer activates this mode to ensure that less energy is consumed.
Except for the cooling system, this mode keeps all parts of the fridge running. When this mode is enabled, the fridge’s interior lighting and display panel will be operational, allowing retailers to demonstrate how it works to potential buyers.
However, once a buyer has made a purchase, the Shop/Demo mode must be disabled. If it remains turned on, all of the food in the fridge will spoil!
- Check to see if the “Cooling Off Mode” light is flashing.
- If so, look for two buttons on the left side of the refrigerator‘s display panel (as per the video).
- Hold down these two buttons for 5-10 seconds.
- Make sure the two buttons are pressed simultaneously. When a single button on the refrigerator is pressed, it makes a different sound.
- Wait a few moments after releasing the buttons.
- If the Cooling Off Mode message appears on the display panel again, repeat the steps until it is disabled.
Our Final Thoughts
To summarize, the FF error code indicates a faulty freezer fan motor. This code can also be obtained if ice is preventing the fan from turning. – Check the gaskets around the doors of LG French Door refrigerators for damage or if the gasket is coming off the fridge door.
Frequently Ask Questions
How do I remove the FF code from my Samsung refrigerator?
Touch and hold Button 1, Button 2, and Button 4 simultaneously until a chime sounds. If you turn off the feature, “OFF” (or “OF OF”) will disappear after a few seconds and your fridge will resume cooling.
What does the letter FF mean on a fridge?
According to the FF error code, the freezer fan motor is broken. This code can be obtained if the fan is not turning due to ice. Examine the gasket around the doors for damage; the gasket may have come loose from the fridge door.
Why does my Samsung refrigerator display 0 FF?
Cooling Off mode (also known as Demo mode or Shop mode) disables the refrigerator’s cooling systems as well as ice making and the water dispenser. Depending on your model, the display will show OF OF, O FF, OFF OFF, or scrolling temperature bars in this mode.