Why Does My Samsung Watch Keep Disconnecting From My Phone? [13 Answers]

Samsung Watch Keep Disconnecting From My Phone? In most cases, your Samsung Galaxy Watch should connect to your Android phone or iPhone without any problems.

But if it gets stuck on the pairing screen or won’t connect to your phone, we’ll go over how to fix a Samsung Galaxy Watch not connecting to an Android phone or iPhone.

Troubleshooting: Issues on why does my galaxy watch keep disconnecting from my phone

Issue	Solution
The watch is not connected to the phone at all.	Make sure that the watch and phone are both turned on and Bluetooth is enabled on both devices. You can also try restarting the watch and phone.
The watch is connected to the phone, but it keeps disconnecting.	Make sure that the watch and phone are close to each other. You can also try turning Bluetooth off and on again on both devices.
The watch is connected to the phone, but notifications are not coming through.	Make sure that the watch is receiving notifications from the phone. You can check this in the Settings app on the watch.
The watch is connected to the phone, but the battery is draining quickly.	Make sure that the watch is not connected to too many Bluetooth devices. You can also try turning off some of the features on the watch that use a lot of battery.
The watch is connected to the phone, but it is not responding.	Restart the watch and phone. If that does not work, you can try resetting the watch to factory settings.

Samsung watch disconnected from phone

The software and apps on your Samsung Galaxy Watch 3 could be outdated, causing it to disconnect from your phone. Its Bluetooth connection has failed. Your smartwatch is in flight mode.

See Other Related Articles:

10 Best Samsung Watch Faces [2023] (Top Picks]

How to Turn on Samsung Watch? [2023] (Answered)

How to Watch Redbox App Samsung TV? [Easy Fix!]

Check This Possible Causes Why Samsung Watch Keep Disconnecting

1. Properly connect the Galaxy Watch to your Android or iPhone.

The first step is to connect the watch and your phone using the proper steps. Open the Galaxy app (Android, iOS, apple watch) on your phone if you have a brand-new watch.

You will see a screen asking you to choose your watch model, followed by on-screen instructions. Your mobile device may prompt you to enable Bluetooth. Wait for the watch to connect to your phone after you allow it to wear os.

However, if you have already set up the watch and it is not connecting or you are stuck on the pairing screen, the methods listed below will assist you with the remote control.

2. Restart the phone and the watch

Start by restarting your phone and Galaxy Watch. Press and hold the Home/Power/Apps button on your watch to restart it. From the list of options, select Power off. To turn on the watch again, press and hold the same button until you see the logo on the screen.

3. Turn on Bluetooth.

Check that Bluetooth is turned on on both your phone and your watch. You will experience connectivity issues if it is turned off on even one device. To activate Bluetooth:

• Go to “Settings -> Connections -> Bluetooth” on Android and toggle the toggle on. You can also enable it through the Quick settings menu.
• Go to “Settings -> Bluetooth” on your iPhone and turn the toggle on. It is also possible to enable it in the Control Center.
• Navigate to “Settings -> Connections -> Bluetooth” on your watch. Check that the Bluetooth toggle is turned on google assistant.

Keep the phone and watch within the Bluetooth connecting range once Bluetooth is enabled on both devices (32 feet).

4. Check Battery Level

If you are facing syncing issues between the phone and watch, it could be due to a low battery on either your phone or watch. Samsung recommends having more than 25 percent battery life on phone and watch. Similarly, check to be sure low or battery-saving mode is is turned off on your phone or watch.

5. Update Galaxy Wearable App

Often the issue is with the old version of the Galaxy Wearable app. To update it, open the Google Play store (Android) or App Store (iPhone). Look for the Samsung Galaxy Wearable app. If one is available, click the Update button. Restart the phone, then reconnect it and watch and wear os app.

Samsung Watch 5 disconnected from Phone

6. Update your phone and watch.

Your phone and watch software, like the app, must be updated to the most recent version for proper operation. Here’s how to update your operating system:

• Go to “Settings -> Software update -> Download” on Android and install. Go to “Settings -> About -> Software update” instead.
• Go to “Settings -> General -> Software update” on your iPhone.
• Open the Galaxy Wearable app on the connected phone to use the Galaxy Watch. Scroll down in the app and install “Watch Software Update -> Download.”

7. Check Phone’s System Language

Some Galaxy Watch users advise keeping English as the phone’s default language during the initial pairing. To change the language of your Android phone, go to ” bluetooth Settings -> General Management (System) -> Language” and select English. Go to “Settings -> General -> Language & Region -> iPhone language” on your iPhone and select English.

8. Empty the Cache for the Galaxy Wearable App (Android Only)

To resolve the watch not connecting to a phone issue on Android phones, try clearing the Galaxy wearable’s cache. Go to ” Open s through connected deviceettings app -> Apps -> Galaxy Wearable app -> Storage” to do so. Restart the phone after pressing the “Clear cache” button.

9. Turn off the phone and the watch.

Reconnecting your phone and Galaxy watch will also help resolve the issue of not connecting. To do so, you must first disconnect them and then reconnect them.

To do so, launch the Galaxy Wearable app and select the three-bar icon at the top. Choose Disconnect. If it says Connect, the watch is already disconnected. To connect, press the Connect button.

Restart both the watch and the phone if you disconnected them. Return to the Galaxy Wearable app and tap the Connect button on the home screen.

10. Register a New Phone

If you previously connected your Galaxy Watch to another phone, the standard method of connecting it to your new phone will not work. You must use your watch’s “Connect to a new phone” feature using power key.

Go to Settings on your Galaxy Watch to do so. Scroll to the bottom and select Connect to new phone. This will cause your watch to be reset. Then, as in Method 1, connect the phone and watch.

11. Replace the Watch

Unpairing the watch from Bluetooth can sometimes help. On Android, navigate to “Settings -> Connections -> Bluetooth.” Tap the Settings icon next to the Galaxy Watch and select Unpair, then pair them again with the Wearable app.

Go to “Settings -> Bluetooth” on your iPhone. Tap the I icon next to Galaxy Watch and select Forget this device, then repair both devices again on phone calls.

12. Reinstall the app and all plugins

You should also try reinstalling the Galaxy Wearable app as well as the plugins you downloaded. Make a point of uninstalling them first.

13. Reset the Watch

Finally, if nothing else works, reset the watch. To do so, open the Settings app on your Galaxy Watch and navigate to “General -> Reset.” Connect the phone and watch as shown in Method 1 after it has been reset.

Conclusion About why does my smart watch keep disconnecting from my phone

Restart your watch if it will not pair with a phone or if it randomly disconnects. Check that the Galaxy wearable app is up to date as well, but it may be necessary to reset the app and unpair your watch. We hope you found this article useful.

FAQ About Galaxy Watch 4 Disconnected from Phone

Question	Answer
Why does my Samsung watch keep disconnecting from my phone?	There are a few reasons why your Samsung watch might keep disconnecting from your phone. These include: The watch and phone are not close to each other. There is interference from other Bluetooth devices. The watch or phone is not updated to the latest firmware. There is a problem with the Bluetooth connection on either device.
What is Galaxy Watch 4 Keeps Disconnecting?	If your samsung watch 4 disconnected from phone, try these troubleshooting steps: 1. Ensure Bluetooth is enabled on both watch and phone. 2. Restart both devices. 3. Unpair and re-pair them. 4. Update the watch’s software. 5. Reset network settings on the phone. If the issue persists, contact Samsung support for further assistance.

Why is my Galaxy constantly disconnecting from Bluetooth?

A Bluetooth device could disconnect from your Galaxy phone or tablet for a variety of reasons. It’s possible that the device’s battery is low, that it was moved too far away from the Galaxy device, or that the Bluetooth function was accidentally turned off.

Why is my Samsung Active 2 watch continuously disconnecting from my phone?

While experiencing this issue, I discovered that the Galaxy Wearable app was enabled in the battery optimization menu in settings. This continued to cause the phone to “optimize” and save battery, effectively hibernating the app and disconnecting the watch.

Is it possible to use a Samsung watch without a phone?

Users of the Samsung Galaxy Watch can also enjoy a true standalone experience with LTE connectivity. They can answer calls, respond to text messages, use GPS mapping, stream music, and more all from their wrist, without having to dig into their pockets for a smartphone.

Can I use my Galaxy Watch 4 without my phone?

The Samsung Galaxy Watch 4G enables users to connect to a 4G network without the need for a smartphone nearby. Users can leave their phone at home and still listen to music, answer calls or messages, and receive notifications while out and about.

References:

• Solved: My Samsung Galaxy watch keeps disconnecting from m… – Page 8 …
• Galaxy Watch keeps disconnecting? Here’s what to do – Mobile Internist
• Why Does my Watch keep disconnecting From My Phone? [13 Reasons]
• Watch keeps disconnecting from phone – Samsung Members Community
• My Samsung Galaxy watch keeps disconnecting from my bluetooth on my phone!