A non-spinning Samsung dryer would be a nightmare in any home.
There are so many clothes to dry, and the dryer isn’t working!
Before attempting to repair anything, it is necessary to determine what is wrong with it.
Samsung dryers combine the best features of both worlds!
These machines not only address your laundry needs with their beautiful finishes, but they also have a variety of drying features that complement any Samsung washer.
With a large capacity and advanced technology that is built to last, it’s no surprise that every household has at least one.
While you may believe that your Samsung dryer is a capable machine, even the best of them can malfunction.
But don’t be concerned! I’m going to tell you about all of those minor issues and how to solve them.
Troubleshooting: Issues on Samsung Dryer Turns on but Doesn’t Spin
|Tripped breaker or blown fuse.||Check your home’s circuit breaker box for tripped breakers, resetting any if necessary.|
|Damaged or frayed power cord.||Inspect the power cord for any damage. If it is damaged or frayed, it should be replaced.|
|Worn-out dryer belt.||The dryer belt helps spin the drum and, with repeated use, can loosen or fray. If the belt breaks, the drum likely won’t spin at all. A worn-out dryer belt can’t be repaired and must be replaced.|
|Clogged lint trap.||A clogged lint trap can prevent the dryer from spinning properly. Clean the lint trap before each use.|
|Error code.||If the dryer is displaying an error code, consult the owner’s manual for troubleshooting instructions.|
List of Common Problems When Your Dryer Won’t Spin
- Belt Fracture
- Drum Glide Damaged Due to a Broken Idler Pulley,
- Worn Out Drum Roller,
- Malfunctioning Motor Due to a Jammed Rear Drum Bearing
Samsung moisture sensor dryer not spinning?
Check for a clogged vent.
Tripped Circuit Breakers must be tested.
Examine the socket fuse.
Modify the Mode Settings.
Examine the Moisture Sensors
See Other Related Articles:
How to Fix Samsung 5d Washer Code? (Quick Guide)
What is Samsung Dryer DE Code? [Answered]
How to Replace Heating Element in Samsung dryer? (Solved!)
How to Fix a Samsung Dryer That Isn’t Spinning and the Most Common Causes
There is nothing more frightening than walking into a dark and silent laundry room only to discover that your clothes haven’t been washed after all. When this occurs, it is never a pleasant experience cause its another appliance repair!
However, it can occur for a variety of reasons, one of which is that your dryer‘s drum has stopped spinning completely. Don’t worry, we’ve looked into the reasons why your dryer repair might be malfunctioning and what you should do in each of the possible situations.
1. The Drive Belt is the first of these.
Drive belts are long, thin belts that are used to drive a dryer. They are wrapped around the drum, through a tension pulley, and finally around the motor pulley.
Samsung dryer not turning
Over time, normal wear and tear may cause the belt to fray. If the belt on the dryer is broken, the samsung dryer drum not turning. Reach into the load washer dryer and turn the drum by hand to quickly determine if the belt has been damaged or is not functioning properly.
Samsung dryer won’t spin belt not broken
If the drum rotates rapidly, it is most likely that the belt has snapped. After that, check the belt to make sure it is not damaged. If the belt is damaged, it should be replaced.
2. The child lock has been turned on.
The most likely explanation for why your Samsung dryer is not spinning but the timer and other features are working properly is that you have the child lock feature enabled. Additionally, you may notice that your Samsung dryer illuminates but does not begin to operate.
Using the Child Lock feature on your dryer, you can keep your children from tampering with your laundry cycles. It works by locking the Start button on your dryer.
A child lock could be the source of your inability to start a cycle.
In the upper-right corner of the control panel, look for an icon that resembles a baby or a lock; it will either have the word “ON” written next to it if it is activated or the word “OFF” if it is not.
It is possible that this symbol will appear as a smiley face instead, depending on the type of appliance.
There are two methods for deactivating the Child Lock button. Alternatively, you can unplug your device for 60 seconds before plugging it back in using the first method, which involves pressing and holding buttons on your control panel for 3-4 seconds.
You should consult your user manual or control panel for instructions if you are unable to turn off the dryer. You should also remove the dryer‘s power cord from the wall socket before attempting to turn it off again.
3. Drum Roller (also known as a drum roller)
Some dryers also include an additional pair of drum rollers to help support the front of the dryer drum, which are typically found on the rear of the dryer. In order to function properly, the rollers must be able to freely spin.
A worn-out set of drum rollers will prevent the dryer from turning properly. It is possible to tell if the support rollers in the dryer are worn out by removing the belt from the dryer and turning the drum manually.
To determine if the washing machine drum is not rotating freely, look for wear on the support rollers. Because of the wear and tear on the rollers, we recommend that you replace all of the rollers at the same time as a preventative measure.
(If the roller shaft is in good condition, it can frequently be repurposed. Before you install the new rollers, make sure you thoroughly clean the shaft if not it will lead you to appliance repair and appliance service.)
4. Axle for the Drum Roller
When the drum rollers become clogged or worn out, the dryer’s motor will become overloaded, and the dryer will be unable to function properly. Over time, the axles on these drums can also become worn down, which can cause them to bind up at certain points in their rotation.
These problems may arise as a result of friction caused by factors such as heat and dust in your home’s laundry room, which can cause problems with their function over an extended period of time.
Nonetheless, they are manageable for you as the machine’s owner – in some cases, simply by adding more lubricant to appliance parts!
When the drumroll axles on your dryer become rusted or worn out, this $30-$40 replacement part can assist you in getting it back up and running.
5. The dryer is not receiving power.
Samsung dryer troubleshooting begins with an examination of the device’s power sources before looking for signs of a malfunction. The dryer belt will not be able to spin unless there is sufficient electrical power.
If the control panel displays an error code of 9C1, 9E, 2E, or 9E1, it is likely that a power problem is the source of the problem.
For a dryer that won’t start drain or spin, follow these steps to troubleshoot the power problem.
- Check that the voltage is correct: While gas dryers can be plugged into a 120V outlet, electric dryers require a 240V cord and outlet in order to provide enough power to the dryer.
- Keep an eye out for tripped breakers: Check your home’s circuit breaker box for tripped breakers and, if necessary, reset any that are tripped.
- Check to see that the power cord is in proper working order and is not damaged: Extension cords should be avoided at all costs. They are unable to safely transmit the amount of power required, resulting in power surges that cause shutdowns. If the power cord is frayed or appears to be damaged, it should be replaced immediately.
6. There is a problem with the dryer settings.
If the dryer is receiving power, the next step is to look for error codes on the control panel that could indicate a problem with the dryer. These codes are typically comprised of a number and letter combination that corresponds to a specific problem that could prevent spinning from occurring.
In order to decipher the code and resolve the problem, refer to your user manual. It is possible that you will need to reset the dryer in order to clear the code from the control panel.
Taking it out of the socket or turning off the circuit breaker should clear the error code in about 1-2 minutes.
As with the lock icon or smiling babyface on the control panel, this indicates that the Control Lock feature is enabled. This function prevents accidental starts by locking all control panel features, including the ability to spin the dial and start the computer.
Refer to your user manual for instructions on how to unlock the Control Lock feature on your computer. This feature can be turned off by pressing and holding two buttons on your dryer for three seconds, depending on the model.
It can also be turned off by performing a Samsung dryer reset on the machine.
7. A Broken Idler Pulley
The idler pulley or tension roller maintains the tension on the belt, preventing the drum belt from slipping off.
When an idler pulley is lacking in lubricant, it begins to squeak, and eventually, the pulley becomes jammed and breaks down completely.
In this case, if you notice that your dryer is making strange noises and then stops spinning, the pulley is most likely broken and requires replacement.
8. Electrical Issues
A standard feature of Samsung dryers is that they come with two fuses. One of the fuses is in charge of controlling the operation of the drum, and the other is in charge of controlling the temperature of the dryer’s heating element.
Any time one of the fuses blows, the tumbler will stop turning completely, even if it is getting hot.
In order to determine whether the fuses are faulty, try turning off the dryer’s circuit breaker for 60 seconds and turning it back on after that. Many electrical problems can be resolved simply by turning off and on the power source.
If, on the other hand, the fuses have been blown, they will need to be replaced. You can also check the fuses with a multimeter to make sure they are still in good working order.
9. Drum Bearings
All of the drums are equipped with bearings, which aid in the support of the drums as they turn. Bearings can wear out or become loose over time, depending on how much use they get.
If the drum itself is worn, there is a good chance that the bearings are worn as well, if not worse. This will almost certainly result in the dryer ceasing to spin.
Samsung dryer wont spin
To inspect the bearing, open the dryer and spin the drum with your hand to see if there is any damage.
If the drum continues to rotate, the bearing is still in good working order. A new bearing may be required in the event that the drum produces an audible grinding or metallic squealing sound when it is turned, or if the drum is extremely difficult to turn for other reasons.
This task can either be completed by you or a technician who will open up the drum and replace the bearing for you.
10. A Damaged Drum Glide
You know that sound – it’s the unmistakable noise of a dryer in its last days. It never stops rattling, thumping, or scraping no matter what you do to fix it, and maybe sometimes your clothes end up with little tears on them because the drum is not turning properly anymore!
Sometimes it’s not the machine itself, but rather some wearing-out parts that need replacing to fix this problem and get your household back on track. One such part is called glides which are typically made of rubber or silicone material for their durability in harsh environments like inside the dryer where there might be heat as well as other objects rubbing against each other all at once!
The noise-causing wear happens when these glide pieces become worn out from use over time. So if you notice your clothes taking longer than usual to tumble while drying fully, then chances are something needs replacement before things go south completely.
11. Door Switch that is not working properly
When the door of the dryer is closed, the dryer door switch indicates that a cycle can be started. When a Samsung dryer does not spin, it is possible that the door switch is faulty and cannot trigger a cycle to begin.
If the dryer light continues to illuminate after the door has been closed, it is likely that the switch is faulty and will require professional repair or replacement.
Samsung Front Load Dryer Not Spinning
If your Samsung front-load dryer is not spinning, there might be a few reasons. Check the belt, motor, and pulley to ensure they are properly functioning. Additionally, make sure the door switch is not faulty. If the issue persists, it is advisable to consult a professional technician for further assistance.
Samsung Dryer Drum Hard To Turn By Hand
If your Samsung dryer drum is difficult to turn by hand, there may be a few reasons behind it. An overload of clothes, worn out drum roller, or a broken belt could be the culprits. Consider checking and replacing these parts if needed to ensure smooth drum rotation and optimal drying performance.
Our Final Thoughts
In spite of the fact that Samsung dryers are some of the most technologically advanced and sophisticated models available on the market, they are still mechanical beasts that will require servicing and repair at some point in the future.
Owners of Samsung tumble dryer not spinning with the drum bearings, which should be taken into consideration.
These are simple to purchase and replace, and while you’re at it, check to see that your drive belt is in good working order as well, as this will eventually wear out over time.
Any signs of wear and tear could be a reliable indicator that it’s on its way out and will need to be replaced in the not-too-distant future.
Frequently Ask Questions
|Why Samsung steam dryer not spinning?||There are a few reasons why your Samsung dryer might not be spinning. Here are some of the most common:|
Tripped breaker or blown fuse. Check your home’s circuit breaker box for tripped breakers, resetting any if necessary.
Damaged or frayed power cord. Inspect the power cord for any damage. If it is damaged or frayed, it should be replaced.
Worn-out dryer belt. The dryer belt helps spin the drum and, with repeated use, can loosen or fray. If the belt breaks, the drum likely won’t spin at all. A worn-out dryer belt can’t be repaired and must be replaced.
Clogged lint trap. A clogged lint trap can prevent the dryer from spinning properly. Clean the lint trap before each use.
Error code. If the dryer is displaying an error code, consult the owner’s manual for troubleshooting instructions.
What is causing my Samsung dryer to turn on but not spin?
When a Samsung dryer does not spin, it is possible that the door switch is faulty and cannot trigger a cycle to begin. If the dryer light continues to illuminate after the door has been closed, it is likely that the switch is faulty and will require professional repair or replacement.
What causes the dryer to turn on but not spin at the same time?
Breaking the drive belt on a dryer is the most common reason for it not to spin. Turning the drum by hand will resolve the problem. Because a working belt should provide some resistance, if the drum turns very easily and loosely, it is likely that the belt has become damaged.
Why does nothing happen when I press the start button on my dryer?
An inoperable door switch is the most likely cause of a dryer not starting when the drum light does not turn off as expected. A blown thermal fuse is a common cause of an electric dryer not being able to start. The thermal fuse can be found on the blower housing, as can be seen in the picture. After unplugging the dryer, look for continuity in the thermal fuse.
- Why Is My samsung dryer not spinning or drying? | Advance Appliance Service
- 11 Reasons of Why My samsung dryer not spinning or drying [Fixed] – DishwasherLeak
- Samsung dryer turns on but doesn’t start or spin
- How to reset your Samsung dryer – Samsung Electronics America
- My samsung dryer won’t spin – Troubleshooting and … – YouTube