What is Samsung Dryer DE Code? [GUIDE]

An error code for a Samsung dryer “Door error” indicates that the dryer‘s control board has detected a problem with the door.

It is usually possible to resolve a DE error code simply by double-checking that the door has been closed properly.

If the door is properly closed, it is possible that a control board glitch is to blame for the error message.

If, on the other hand, the error code persists, it is possible that the dryer’s door switch, the door itself, the wiring, or the control board is to blame.

Fortunately, our guide is available to walk you through the process of diagnosing and correcting the problem.

Troubleshooting: Issues on Samsung Dryer Code DE

Issue	Solution
Door not closed properly	Make sure the door is closed all the way and latched securely.
Door switch is faulty	Replace the door switch.
Door hinges are loose or damaged	Tighten or replace the door hinges.
Wiring to the door switch is damaged	Repair or replace the wiring.
Control board is faulty	Replace the control board.

This guide applies to the majority of Samsung dryer models, including the ones listed below:

• DV203AEWXAA
• DV203AGSXAA
• DV203AGWXAA
• DV206AESXAA
• DV206AGSXAA
• DV209AEWXAA
• DV210AEW/XAA
• DV210AEWXAA
• DV210AGWXAA
• DV218AEBXAA
• DV220AEW/XAA
• DV330AEW/XAA
• DV350AEWXAA
• DV419AEWXAA
• DV42H5000EW/A3-0000
• DV42H5200EP/A3-0000
• DV42H5200EW/A3-0000
• DV448AEP/XAA
• DV448AEPXAA
• DV45H7000EW/A2-0000
• DV48H7400EW/A2-0000

WHAT EXACTLY DOES THE DE ERROR INDICATE?

The door is referenced by the two-letter error code that contains the letter d.

In this case, the dE (dE1, dE2) error code indicates that the door block has been broken.

de code on samsung dryer

Some models specify the given problem as dF or dO, respectively, in their specifications.

Furthermore, the dryer stops working immediately after starting the program, and it can become blocked at any point during the process.

In the case of out-of-date laundry appliances that lack a display panel, all of the mode and temperature indicators will illuminate simultaneously.

See Other Related Articles:

How to Reset Samsung Dryer ? (SOLVED)

How to Reset Samsung Dryer Control Board? (Quick Fix)

How to Replace Heating Element in Samsung dryer? (Click Here)

SOMETHING THAT MAY HELP YOU SOLVE THIS PROBLEM

If the error code appears for the first time, try the following steps to reset it:

1. Pulling the plug from the wall outlet will allow you to disconnect your laundry appliance from the power source.
2. Allow 10-15 minutes for the washing machine or dryer to run without being plugged in
3. Reconnect the power cord to the wall outlet and begin the washing cycle once more.

How to Fix DE Error Code withoug Replacing Door Switch Video?

Is it possible that the dE error code will not appear again?

As a result, it was the control unit that failed. The recurrence of the error code indicates the presence of a malfunction. It will continue to flash until the problem has been resolved.

Another possibility that you can successfully eliminate on your own is a foreign object that has become lodged in the door slit. If there are any protruding edges of clothing that prevent the tongue from completely entering the groove, it is necessary to open the door and inspect them for damage.

If there are any, take the laundry out and close the door until it clicks shut properly. After that, select the appropriate program and turn on the dryer.

samsung dryer de error

Next, a skew caused by the transportation or movement of the laundry appliance can result in the dE error code being displayed on the screen. With a spirit level, you can align the dryer or washing machine horizontally and/or vertically and thus eliminate the problem.

When all four of the laundry appliance’s feet are firmly planted on the ground, the latch will fit tightly into the hinge, allowing the laundry appliance to begin the program without interruption.

The other situations necessitate more drastic measures.

Possible Reasons Why Dryer DE Code

1. The door does not close properly.

Many Samsung dryer models will display a DE error code if the door is not closed properly, which is common. When the door does not close properly, it is usually because there is something in the dryer that prevents the door from closing properly.

If you haven’t already done so, check to see if there is anything in or around the dryer that is preventing the door from closing properly. If there is nothing in the way of the door, proceed to the next step.

2. Child Lock

Have you checked to see if the child lock feature has been enabled?

what does de mean on samsung dryer

If your Samsung dryer is equipped with a child lock feature, it is possible that it is causing or has caused the DE error code. Typically, if the child lock is activated, the control panel of the dryer will display the letters “CL.”

Some models, on the other hand, may display the DE error code if someone attempts to open the door but is unable to do so because the child lock is activated on the door. Before proceeding to the next step, make sure that the child lock has not been activated on the computer.

Even if turning off the child lock does not resolve the DE error code, it is possible that the problem with the door was caused by someone attempting to open the door with force while the child lock was activated.

3. A problem with the control board

On rare occasions, a glitch in the dryer’s control board can result in the DE error code being displayed. Assuming there was an error, there is nothing wrong with the dryer, and all you need to do is turn off the power to clear any error codes and reset the dryer.

To reset the dryer, the power to the dryer must be turned off for five minutes to give the electrical charge enough time to dissipate before turning it back on.

If there was a glitch in the system, the error code will be cleared when the power is restored. If, on the other hand, the DE error code appears again, there is most likely a problem with the door, which we will troubleshoot below.

4. The door hinge is a type of hinge.

The DE error code indicates that the door has failed to close properly. The door hinges could be a contributing factor to the problem. If the hinges are loose or damaged, it is possible that this will have an impact on how the door closes.

In some cases, lifting or lowering the door slightly when closing it may be sufficient to temporarily resolve the DE error code. If the problem is with the door hinges, replacing them should be sufficient to resolve the DE error code problem.

5. The assembly for the door latches

If the door latch and strike are not aligned, it is possible that the DE error code will be triggered, just as with the hinges.

It is possible that over time, parts of the door latch assembly will become bent or deformed, resulting in the door not closing properly.

If the door latch assembly is damaged, you may be able to repair the problem by adjusting various parts of the door latch assembly; otherwise, the door latch assembly will need to be completely replaced.

6. The door switch or the electrical wiring harness.

The dryer’s door switch serves as a safety precaution, allowing the dryer to operate only when the dryer door is fully closed and locked. According to your model, if there is a problem with the door switch, the dryer will most likely display an error code DF, which stands for “door circuit failure,” on the display.

samsung dryer error code de

Even if the door switch is not malfunctioning, some models may still display the DE error code if there is an issue with it.

Another possibility for the occurrence of the DE error code is if the wiring harness for the door switch is loose or damaged. If the wiring harness is loose, it is likely that plugging it in securely will resolve the DE error code problem.

You may want to attempt to repair or replace the damaged wiring; however, given the high cost of repairing the wiring as well as the possibility of it failing again, it may be more cost-effective to replace the entire wiring harness.

It is likely that the control panel, top dryer panel, and front panel of the dryer will need to be removed in order to gain access to and inspect the door switch and wiring harness. Additionally, a multimeter will be required to check for continuity in the door switch (a continuous electrical path).

The following instructions are applicable to the majority of Samsung dryer models. Removal of the front or top panels may not be necessary on some models.

7. Microcircuitry fails to function properly.

dE error code appears at the beginning of the program, in this case, i.e, the laundry appliance starts as usual, but after selecting and starting the washing program, it begins to slow down significantly.

The resistors that are in charge of controlling the door locking device are the source of the majority of the problems.

Depending on the type of failure, you should either replace the resistors or replace the entire board with new components. First and foremost, you should solder the connections and thoroughly inspect the unit.

The deviations from the norm that were detected with the multimeter are indicative of a burned-out microcircuit in the circuit.

8. Wiring that has been damaged

Due to a flickering or non-existent board power supply, the dE error code may be displayed on the computer’s screen. Furthermore, despite the emergency reboot, the dE error code appears or disappears on a regular basis.

As a result, the signal from the hatch locking elements is not communicated with the other parts of the laundry appliance in this situation.

The best way to troubleshoot this problem is to use a tester and then repair the electrical circuit by stripping and twisting the wires that have become disconnected. They are soldered together in the event of a faulty contact.

It is necessary to replace the entire harness if the breakpoint cannot be located or identified.

SOMETHING THAT MAY HELP YOU SOLVE THIS PROBLEM

If the error code appears for the first time, try the following steps to reset it:

Firstly, unplug your laundry appliance from the power source by removing the plug from the wall outlet; secondly, leave the washing machine or dryer unplugged for 10-15 minutes before plugging it back in and starting the washing program.

Is it possible that the dE error code will not appear again? As a result, it was the control unit that failed. The recurrence of the error code indicates the presence of a malfunction. It will continue to flash until the problem has been resolved.

Another possibility that you can successfully eliminate on your own is a foreign object that has become lodged in the door slit. If there are any protruding edges of clothing that prevent the tongue from completely entering the groove, it is necessary to open the door and inspect them for damage.

If there are any, take the laundry out and close the door until it clicks shut properly. After that, select the appropriate program and turn on the dryer.

Next, a skew caused by the transportation or movement of the laundry appliance can result in the dE error code being displayed on the screen. With a spirit level, you can align the dryer or washing machine horizontally and/or vertically and thus eliminate the problem.

When all four of the laundry appliance’s feet are firmly planted on the ground, the latch will fit tightly into the hinge, allowing the laundry appliance to begin the program without interruption.

The other situations necessitate more drastic measures.

The door switch and wiring harness should be checked according to the following procedures:

• Unplug the dryer’s electrical connection. If you have a gas dryer, be sure to turn off the gas.
• Remove the screws that hold the top panel of the dryer in place.
• Lift the top panel of the dryer away from the dryer after the screws have been removed.
• Disconnect the wiring harness from the computer.
• Remove the screws that hold the front panel in place (at the top of the dryer).
• Remove the remaining screws that hold the front panel of the dryer to the dryer by opening the door and removing them.
• To remove the front panel from the dryer, use a flathead screwdriver to depress the locking tabs that hold it in place (at the top of the panel).
• Disconnect the wiring harness for the door switch.
• Examine the wiring harness for signs of wear and tear on the door switch. If the wiring harness is damaged, it may be necessary to replace the wiring harness or to replace the individual wires.
• Remove the front panel of the dryer and set it aside.
• The door switch can be found on the front panel; simply locate it and unscrew the retainer from the door switch.
• By depressing the tab that holds the door switch to the panel, you can remove it from the panel completely.
• Examine the door switch for signs of damage, such as burn marks or a broken component, and replace it if necessary.
• Using a multimeter, check for continuity in the door switch circuit. When the door switch is activated, a properly functioning door switch should display an infinity reading that changes to a zero reading. The door switch will need to be replaced if it is found to be malfunctioning.

Our Final Thoughts

If the above-mentioned procedures have failed to resolve the DE error code samsung dryer, it is possible that the control board is faulty. It is best to leave the testing and repair of the control board to a qualified professional. But if you are certain that the control board is to blame for the error code, it can be carefully removed from the dryer and replaced with a new one, which will repair the dryer and eliminate the DE dryer code.

Frequently Ask Questions

Question	Answer
what does DE mean on a samsung dryer	The DE code means “door error.” This means that the dryer’s control board is detecting a problem with the door.
Why does my Samsung dryer keep saying DE?	There are a few possible reasons why your Samsung dryer keeps saying DE. The most common reason is that the door is not closed properly. Other possible reasons include a faulty door switch, loose or damaged door hinges, damaged wiring, or a faulty control board.
How do I fix the DE code on my Samsung dryer?	There are a few things you can try to fix the DE code on your Samsung dryer. First, make sure the door is closed properly. If the door is closed properly, you can try resetting the dryer by unplugging it for 5 minutes and then plugging it back in. If that doesn’t work, you may need to replace the door switch, tighten or replace the door hinges, repair or replace the wiring, or replace the control board.
Can I fix the DE error samsung dryer myself?	In some cases, you may be able to fix the DE samsung dryer on yourself. However, if you are not comfortable working with electrical appliances, it is best to call a qualified technician.

References:

• Samsung Dryer Error DE – How To Fix?
• Samsung Dryer Error Code DE – How To Fix?
• Samsung Dryer Error Code DE – How To Fix?