dishwasher

What is Samsung Dishwasher OE Code? [Answered!]

The Samsung Dishwasher OE Error Code is a common problem with Samsung dishwashers.

It usually indicates that there is a problem with your dishwasher’s drainage system, which is preventing water from draining properly.

This can cause issues because not all of the food particles are removed from the dishes before they are placed in the dishwasher to be cleaned.

This error usually occurs when there is a buildup of food particles or grease in the dishwasher’s Fine Filter System and Sump. Fortunately, this error code has a simple fix that you can do yourself instead of calling a technician.

The 1E and/or OE Error Codes are caused by a blockage in the drain line that prevents the unit from draining properly. In most cases, however, this can be resolved by running the Fine Filter System and Sump through the dishwasher for a couple of minutes. When all else fails, it is necessary to call for professional assistance.

What Does The 1E or OE On The Display Of The WaterWall™ Dishwasher Mean? |  Samsung Support South Africa
What is Samsung Dishwasher OE Code?

What exactly is Error Code OE?

If your dishwasher stops working and you see the error code OE, it means you have an Overflow Error. This indicates that the dishwasher’s draining system is clogged.

This type of error code is important on modern dishwashers because it causes the machine to stop operating whenever the water does not drain properly from the unit. A water overflow and flooded kitchen are the alternatives to error code OE.

This code can be cleared by removing the blockage or cleaning the Fine Filter System, as described below. But first, here are some of the causes of clogged dishwasher drainage systems.

  1. The dishwasher filter system has become clogged with food or other debris.
  2. After installing a new garbage disposal, the knockout plug is not removed.
  3. Somewhere in the house, a clogged pipe downstream of the dishwasher.
  4. The drain hose from the kitchen sink to the dishwasher is clogged.
  5. A problem with the sewer lines in the home, which can affect all drain pipes.

OE Samsung dishwasher OE Code

Don’t be concerned if you encounter the OE error code; there may be a straightforward solution to this common problem. When the machine is turned on or when it is in use, this message may appear on the screen. In addition to the display, a beep or a flashing “Smart Auto” light will be heard.

See Other Related Articles:

How to Fix Samsung Dishwasher Error Code 4e [Solved]

What is Samsung Dishwasher Error Code 7e? (Click Here)

Best Samsung Dishwasher (Top 5 Dishwasher)

What is the procedure for resetting a Samsung dishwasher?

  1. For 10 or 15 minutes, turn off the electricity or unplug the dishwasher from the wall.
  2. Connect the dishwasher to the wall outlet and turn it on.
  3. To start the dishwasher, press the power button on the control panel.
  4. Start a new cycle without washing any dishes.

When you do this, the dishwasher’s memory is cleared, and any error codes that may have been stored are no longer present.

Ensure that there is no water coming into the machine from the outside if the error code OE appears on your Samsung washing machine. In addition, check the drain hose for any loose connections that may have occurred during the manufacturing process.

It is most likely that the error was caused by an unintentional liquid spillage if the drain hose connections are secure and there is no visible liquid spillage on the drain hose.

If the error code does not disappear after a few attempts, follow these steps:

  1. Remove the appliance from the wall outlet and turn off the water supply.
  2. Tilt the appliance at an angle to allow the excess water to drain.
  3. Remove all of the items from your dishwasher and leave it to air dry for a couple of hours before turning the machine back on again.
  4. As soon as it is completely dry, tighten the connections and run a cycle without any dishes to ensure that the error code has been eliminated.

Don’t be concerned if you encounter the OE error code; there may be a straightforward solution to this common problem. When the machine is turned on or when it is in use, this message may appear on the screen.

In addition to the display, a beep or a flashing “Smart Auto” light will be heard.

Recommended:  What is Samsung Dishwasher Error Code 7e? (Solved)

What is the procedure for resetting a Samsung dishwasher?

  1. For 10 or 15 minutes, turn off the electricity or unplug the dishwasher from the wall.
  2. Connect the dishwasher to the wall outlet and turn it on.
  3. To start the dishwasher, press the power button on the control panel.
  4. Start a new cycle without washing any dishes.

When you do this, the dishwasher’s memory is cleared, and any error codes that may have been stored are no longer present.

Ensure that there is no water coming into the machine from the outside if the error code OE appears on your Samsung washing machine. In addition, check the drain hose for any loose connections that may have occurred during the manufacturing process.

It is most likely that the error was caused by an unintentional liquid spillage if the drain hose connections are secure and there is no visible liquid spillage on the drain hose.

If the error code does not disappear after a few attempts, follow these steps:

Remove the appliance from the wall outlet and turn off the water supply.

Tilt the appliance at an angle to allow the excess water to drain.

Remove all of the items from your dishwasher and leave it to air dry for a couple of hours before turning the machine back on again.

As soon as it is completely dry, tighten the connections and run a cycle without any dishes to ensure that the error code has been eliminated.

Different Possible Reasons for Samsung OE Dishwasher OE Code

Error code on a Samsung dishwasher The letter O indicates that the water level in the dishwasher has been exceeded. There can be a variety of factors contributing to such failure.

Samsung Dishwasher Repair oE code_CRICKET in Water Level Sensor - YouTube
Different Possible Reasons for Samsung OE Dishwasher OE Code

1. No discharge due to clogged discharge system

During a thorough examination, it can be identified. A clogged discharge prevents water from flowing through the system, resulting in an OE error.

Allow time for the dishwasher to cool if it was just turned off. Afterward, open the door and look for a grid in the lower part of the body to complete the task. Turn the filter knob counter-clockwise.

Remove the cover and the flat microfilter from the compartment. Remove the dirt from the area with a brush and then rinse the area with running water. Examine the bottom of the container.

Examine the discharge tube to see if it is in good condition. If you use the quick mode a lot, it will eventually become clogged with grease. Replace the grid and filter cover on the filter.

If this does not resolve the issue and the system continues to display the OE error code, the water discharge hose may be the source of the problem. If it is pressed or clogged, the water in the machine will become stagnant. In this case, the bend should be removed or the obstruction should be cleaned.

2. Failure of the Intake valve

image 2
Failure of the Intake valve

This component is responsible for supplying water to the chamber. When the level switch sends a signal to the unit indicating that the tank is full, the printed circuit board sends an impulse to the valve, which opens the valve.

This should be followed by a firm closure of the membrane. If the part is not functioning properly, the hole will remain open and the water intake will not be stopped, resulting in the display of Samsung dishwasher error code E on the screen.

Close the valve and turn off the power to the machine.

This problem could be caused by a failure of an electronic or mechanical component. Turn off the dishwasher and look for the water feed valve at the bottom of the machine.

Check the terminals with the probes from the analyzer. A resistance that is too high or too low indicates that the intake element should be replaced.

2. Problems With the Pressure Relay

If the dishwasher discharge is activated even though the tank is not completely full, this indicates a problem with the pressure relay. It regulates the level of liquid in the tank and sends impulses to the circuit.

False signals are generated by the sensor when the membrane is damaged or a short circuit occurs. For example, it may indicate that there is an excessive amount of water in the chamber. The message “OE error” appears on the screen.

Recommended:  11 Reasons Why Samsung Dryer Won't Start (Solution!)

Check the electronics with a circuit analyzer to ensure they are in working order. If the readings are incorrect, it is possible that the part will need to be replaced.

The specific technical manual for the dishwasher contains information on the resistance values of various components. Is the level of resistance normal?

It is possible that there is a problem with the mechanical component. It is possible that debris in the membrane’s air chamber or rubber tube will cause the pressure relay to close.

Samsung dishwasher is displaying an error code
Problems With the Pressure Relay

Blow the tubes to pieces. If you hear some clicks, that means everything is in working order. If the answer is no, the tube will need to be cleaned with a blast.

3. Inlet Valve that is Not Working Properly

The water intake valve on a dishwasher allows water to flow into the dishwasher tank and into the dishwasher. It also has a sensor that measures the level of water in the tank.

The control unit then issues an instruction to the valve, instructing it to open or close depending on the level of water in the reservoir.

If the water inlet valve is not working properly, the dishwasher will be unable to receive water. As a result, the Samsung Dishwasher OE Error Code is displayed on the screen. Close the valve on your dishwasher after it has been turned off.

It is possible for wear and tear to occur in your water inlet valve as it gets older. If your solenoids are not able to maintain engagement, you will be notified that you need to replace your valve.

Solenoids are critical to the operation of a water inlet valve and must be in proper working order in order for the valve to perform its function properly.

Activate the multitester plugin. Increasing the resistance by one ohm is recommended. Connect the wire probes to the terminals one at a time. A low reading indicates that everything is working properly, while a high reading indicates that something is wrong.

4. Inspect the water level sensor.

One of the most obvious signs of a faulty water flow sensor is the inability of your dishwasher to properly load water into the dish machine basket. Upon encountering this situation, the machine will not continue with its cycle and will instead display an OE error on the screen.

Other indicators include the fact that your dishwasher is not running a cycle or simply will not turn on. A faulty water flow sensor can cause any or all of the problems listed above.

Open-circuit faults can be caused by a discontinuity, a blown, or a weak contact, among other things. As a result, the control unit receives a false signal from the Samsung dishwasher water level water error sensor, indicating that the dishwasher has overflowed.

5. Electronic regulator that is not functioning properly

If your dishwasher displays an OE error code, it is likely that there is a problem with the control unit, which is responsible for running all of the preset cycles.

Attempt unplugging the dishwasher for an hour and then plugging it back in to see if that helps to resolve the problem.

Some advanced models come equipped with self-repairing software, so if at all possible, try to have the software for your dishwasher updated for your samsung appliance.

  1. If there is a problem, it is critical to determine what caused the problem. Any problem can be traced back to a variety of different causes, including:
  2. It is possible that the electronic chip has a short circuit.
  3. It’s possible that a protective resistor has blown.
  4. It’s possible that the wires themselves were damaged.
  5. It is necessary to replace the regulator if the electronic chip has been damaged beyond repair as a result of the process.

Dishwasher Error Code OE: What to Do If You Get It

To resolve the Samsung dishwasher error code OE, you will need to clear the clog from the dishwasher. Typically, it is the fine mesh filter, which traps food and other debris before it enters the piping system, that becomes clogged with debris.

Make sure to give the machine plenty of time to cool down before beginning any troubleshooting.

The following are the steps that must be followed in order to clean the fine filter of the machine:

  1. To begin, you’ll need to figure out where the machine’s filter assembly is located. If you have a dishwasher, it is typically located at the bottom and center of the cavity, where the water drain pump from the machine.
  2. The filter compartment door can be unlatched by rotating the filter handle in the counterclockwise direction.
  3. Remove the flat mesh filter that is beneath the filter door after you have removed the filter door.
  4. Remove any embedded dirt, debris, or food from the microfilter by rinsing it thoroughly and using a soft toothbrush to remove it.
  5. Inspection of the lower portion of the drain system while the filter is removed to remove any food particles and to wipe away any grease or dirt buildup while the filter is removed
  6. Reinstall the filter in the compartment, reattach the filter door, and rotate the filter door clockwise to secure it in place.
  7. In addition to cleaning the fine filter system on a regular basis, regardless of whether or not you are receiving an Error Code OE, you should also clean the coarse filter system. This depends on how much food your family tends to leave on dishes before loading the dishwasher.
  8. Restart the dishwasher to finish the rest of the load. It is possible that the blockage is somewhere else in your plumbing systems, such as between the garbage disposal, kitchen sink, dishwasher, and final drain pipes if this procedure does not remove the error code OE completely.
  9. If you have a clog in your piping system, you should consult with a professional Samsung dishwasher mechanic or a plumber to locate and clear the obstruction.
Recommended:  How to Fix Samsung Dishwasher Error Code 4e [Solved]

Tips for Avoiding OE Error Codes.

Besides cleaning your dishwasher and its fine filter system on a regular basis, you can prevent your dishwasher drain from clogging by clearing plates of food before loading them into the dishwasher to also avoid loose wires.

While using a warm water wash cycle saves energy, you should also run a hot water wash cycle on a regular basis to remove mineral buildup from your clothes.

Simple pouring a cup of white vinegar or a cup of baking soda into the bottom of your dishwasher will help to keep it smelling fresh and bacteria-free all of the time.

Allow the vinegar or baking soda to sit overnight, and then run the dishwasher the next morning with the dishes still in it.

If your dishwasher begins to smell or if you notice a buildup of grime at the bottom of the bowl, perform this maintenance procedure.

Our Final Thoughts

The OE error code on a Samsung dishwasher typically indicates that the unit is unable to obtain water. You should try to straighten out your drain hoses if you notice them kinked or tangled up—these are other symptoms of a faulty regulator, water inlet valve, or false sensor data—and call for assistance if you need it.

Please let me know if you require assistance with your Samsung dishwasher in the comments section below. I’d be happy to provide some pointers on how to troubleshoot and resolve any error codes that may appear on your screen.

Frequently Ask Questions

What is the procedure for resetting the code on my Samsung dishwasher?

The process of resetting your dishwasher is straightforward. Unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to dissipate from the dishwasher (usually 1 to 5 minutes at the most), and then plug it back into the outlet. That’s all there is to it. That’s all it takes to restart your computer.

On a Samsung dishwasher, where is the drain sensor located?

What it is: A drain filter can be found inside your Samsung dishwasher’s cabinet. In this section of the appliance repair, which is near the bottom, water collects before being removed by the drain hose.

What should I do if my Samsung dishwasher is giving me an OE error?

The 1E and/or OE Error Codes are caused by a blockage in the drain line that prevents the unit from draining properly. In most cases, however, this can be resolved by running the Fine Filter System and Sump through the dishwasher for a couple of minutes. When all else fails, it is necessary to call for professional assistance.

Similar Posts