Why Airpods Won’t Stay Connected? (7 Reasons )

Airpods Won’t Stay Connected? AirPods that keep disconnecting at random can be inconvenient.

Since their debut in 2016, AirPods have grown in popularity. Despite their incredible sales numbers, they are not without flaws.

Disconnection issues have plagued AirPod users since their inception.

At first, the occasional disconnect may not seem like a big deal. However, as time passes, this issue may become more vexing.

This is especially true if it occurs in the middle of an important phone call. It has the ability to turn a seemingly simple phone call into a series of call-backs.

Today, we’re going to take a look at why your Airpods wont stay connected, as well as the best solutions to those problems.

Here is a quick check first.

Why Airpods Won’t Stay Connected?

If your AirPods are not staying connected, outdated device firmware could be the cause. Connect your AirPods to your iPhone and navigate to Settings > General > About > AirPods to verify the Firmware Version.

See Other Related Articles:

How to Connect AirPods to a Samsung Tablet? [6 Steps]

Galaxy Buds Pro VS Airpods Pro: Ultimate Comparison

How to Connect Airpods To Samsung TV? (Solved)

Why do my AirPods keep Disconnecting?

Airpods are a significant improvement over Apple’s previous earbuds. But that doesn’t mean they don’t have their own set of problems. There are a variety of reasons why your AirPods may become disconnected from your device. Some are simpler to repair than others to fix airpods.

In any case, it’s important to understand what’s causing the disconnections so you can take proactive measures to stop them and fix airpods.

1. Bluetooth interference

Airpods, like all wireless Bluetooth headphones, are vulnerable to Bluetooth interference or bluetooth setting Devices that operate on the same wavelength as Bluetooth may interfere with the connectivity of your AirPods. This causes a number of problems, including disconnection.

Bluetooth interference may occur if you are near a Wi-Fi router, for example. This is because the router communicates with other network devices using the same 2.4GHz frequency system preference so it’s important to reset network settings on your bluetooth device.

2. Issue with iOS Version

If your iOS version is out-of-date, you may encounter bugs or errors that have already been fixed in a later version. These errors can include compatibility issues between your AirPods or apple tv and apple device, remember that apple support can help you to setup button.

3. Hardware problem

In some cases, the issue may be with the AirPods keep disconnecting electronics. If your AirPods have sustained physical damage over time, the electronics inside may be faulty, resulting in sporadic performance issues.

Because AirPods are designed to be portable, there’s no doubt that they’ll accompany you wherever you go.

As a result, you want to take the best possible care of them. Getting a protective case for them to live in is a great way to ensure they are safe. Cleaning your Airpods on a regular basis can also help you avoid this issue on apple logo. This avoids damage caused by accumulated debris or wax buildup to control center.

4. Wrong settings

If your device is not properly configured, your AirPods may not maintain a consistent connection. It’s a good idea to go over your Bluetooth settings to make sure your AirPods stay connected to each device you pair them with.

This can also be an issue when connecting your AirPods to your Android device. Although the two can technically communicate, the connection isn’t as seamless as when using Airpods with Apple devices. A few settings adjustments are required, and some features may be unavailable.

5. Low battery

Since they’re wireless, your AirPods need sufficient charge in order to function properly.

When your AirPods run out of juice, they will disconnect from any paired device. This can also happen at random if the battery is nearly depleted. As a result, it is recommended that you keep them charged to avoid poor performance.

6. Bluetooth versions that are incompatible

Apple AirPods pair seamlessly with Bluetooth 5.0 devices. Unfortunately, if your Windows PC or other devices are using an older Bluetooth version, the AirPods must downgrade their connection to match your audio device. This means that the AirPods’ range and connection quality will fall short of their maximum capacity.

7. Firmware issues

There have been numerous reports of the issue since the recent firmware 6.8.8 update. According to some users, the update caused a slew of audio issues, including but not limited to: AirPods shutting down after about 30-45 minutes of music-only playback, AirPods disconnecting after about 10 seconds in calls, and switching from music playback to calls results in disconnection.

Unfortunately, this firmware issue persists for the first generation AirPods. AirPods 2 and AirPods Pro, on the other hand, have already received a newer update to version 3E751. This resolves the device disconnection issues. So, if you have the AirPods 2 or AirPods Pro, make sure to update the firmware.

To do this, simply follow these steps:

1. Navigate to your iOS Settings and select Bluetooth.
2. Locate your AirPods in the device list.
3. Tap the I icon to the right of them.
4. The current firmware version of your AirPods can be found on the following page. If it’s 3E751, you already have the most recent firmware. If not, simply connect your AirPods to your iPhone while your WiFi is turned on, and the update should be installed automatically to open settings.

QUICK FIXES FOR AIRPODS THAT KEEP DISCONNECTING

Finding and fixing your AirPods’ disconnection problem is relatively simple, and can usually be completed in a matter of minutes.

You will find a variety of solutions that may prevent your AirPods from disconnecting below. Make sure to start with the first solution and work your way down before making any changes to your Settings.

1. Examine the AirPods’ battery life

First and foremost, you should determine how much battery life your AirPods still have. Your AirPods will require enough battery to connect to (and stay connected to) your device.

Checking the battery of your AirPods on iOS device

1. Open the lid of the AirPods case and place them close to your device.
2. The remaining battery amount will appear on your screen after a few seconds.

On Mac, you can check the battery life of your AirPods.

1. Remove your AirPods from their case and set them aside.
2. Click the Bluetooth icon in the menu bar on your Mac. It should show the current battery percentage of each earbud as well as the case.

2. Check that Bluetooth is turned on

Bluetooth must be turned on for your device to establish and maintain a connection with your AirPods.

If you’re having trouble connecting to your AirPods, try turning your Bluetooth off and on again. This ensures that the closest device (your AirPods) connects first instead of automatic switching.

1. Turning on Bluetooth on the iPhone and iPad
2. On your iPhone, launch the Settings app.
3. Navigate to Bluetooth.
4. To activate Bluetooth, slide the switch to the right.

Enabling Bluetooth on a Computer

1. Right-click the Start button and then select Settings.
2. Navigate to Bluetooth.
3. To activate Bluetooth, slide the switch to the right.

You can also ask Siri to enable Bluetooth if you have it enabled by saying “Hey Siri,” then “Turn on Bluetooth.” Go to our guide on how to connect any Bluetooth headphones on Mac for instructions.

Enabling Bluetooth on a Computer

1. Right-click the Start button and then select Settings.
2. Toggle the Bluetooth switch to the right by clicking on Devices.

If you have any problems enabling Bluetooth on your PC, please read our article on the various problems and solutions for connecting Bluetooth headphones to PC.

3. Put the AirPods back in the case (then take them out again)

If your AirPods become disconnected, they may not reconnect automatically. If this occurs, place them back in their case. When you replace your AirPods in their case, they will start charging. Any paired connection is automatically removed.

Remove them from the case and replace them in your ears after 5 seconds. The AirPods will then automatically reconnect to your device, and when the lid of your case is opened, a new connection will be established.

4. Reset your Airpods

Over time, it’s not uncommon for AirPods to run into issues. This includes the AirPods not charging, connecting, or disconnecting at random. These are usually fixable with a simple reset.

Any paired device history is erased when you reset your AirPods. This effectively resets them to factory settings, allowing your device to be the first to pair with them.

1. Put both of your AirPods back in their cases and make sure they’re fully charged (above 75 percent ).
2. Hold down the button on the back of your AirPods case for 20 seconds after opening the lid.
3. The indicator inside the case will change from white to amber, indicating that the AirPods have been successfully reset.

5. Turn off ‘Automatic Ear Detection’

Each AirPod has a sensor that detects when they are in use and when they are not.

This sensor can have trouble detecting whether they’re in your ear or not, which causes them to disconnect in an attempt to save power. It’s made worse if you’re having difficulty keeping your AirPods in place.

A slight shift in position may activate the Automatic Ear Detection and result in disconnection. To isolate your disconnection issue, disable this setting and see if it resolves the issue.

1. Make sure your case is open before you begin. Once open, go to Settings and then Bluetooth.
2. In the list of devices, tap the I on the right side of your AirPods.
3. Uncheck the Automatic Ear Detection box.

If you’ve tried all of the general fixes and the problem still persists, it could be a problem with your audio device settings. Continue reading to learn how to keep your AirPods connected and working properly on your Mac, iPhone problems/iPad, Apple Watch, or Windows PC.

Airpods Keep Disconnecting From Mac

To ensure the audio from your Mac is coming through your AirPods, check to confirm they are the preferred output device or reset iphone.

1. On your Mac, open System Preferences.
2. From here, click Sound, then click Output.
3. Select your AirPods from the device list to ensure they’re the active output device.

AIRPODS KEEP DISCONNECTING ON AN IPHONE OR IPAD

If you have some incorrect settings on your iPhone or iPad, you can easily fix them by disconnecting and reconnecting the AirPods disconnect.

1. Navigate to the Bluetooth section of your iPhone or iPad’s Settings.
2. Next to your AirPods, tap the I icon.
3. Tap again to confirm, then select Forget This Device.
4. Restart your device and reconnect to the AirPods.

If this doesn’t work, try unplugging all previously connected Bluetooth devices before reconnecting your AirPods. The AirPods will be prioritized as a result of this.

AirPods Not Connecting to Apple Watch

If your AirPods are facing issues with your Apple Watch, there is a really easy fix to making sure they’re both performing at their best.

1. Start by turning off your Apple Watch, then your iPhone.
2. Turn your iPhone on, and then your Apple Watch.
3. Once both devices are back on, connect your Airpods to your Apple Watch and check for performance issues.

AIRPODS KEEP DISCONNECTING ON WINDOWS PC

Unlike other devices, disconnecting AirPods on a Windows PC can be difficult. This is primarily due to the variety of potential issues.

Before you begin, ensure that your AirPods have the most recent firmware update. Let’s get into how to fix each of them down below!

Turn off Power Management

If you use your AirPods with a Windows PC, you may have noticed that when a song is paused, the automatic on/off function inside your AirPods may cause them to disconnect in order to save power.

This is because they think there is no longer a device connected. To fix this, you can alter some settings within Windows.

1. Right-click your Start button and select Device Manager from the menu that appears.
2. Click View and make sure that ‘Devices by type’ is selected.
3. Expand the Human Interface Devices section to reveal two entries: “Name> AirPods Audio/Video Remote Control HID” and “Name> AirPods Hands-Free Call Control HID.”
4. Right-click on each and select Properties.
5. Navigate to ‘Power Management.’ Uncheck the box next to ‘Allow the computer to turn off this device to save power,’ then click ‘OK.’

In some instances, the AirPods do not appear in the list of Human Interface Devices. If that’s the case, try right-clicking the taskbar and selecting “Show Hidden Devices.”

Utilize Services App

You can also try fixing the issue by setting your Bluetooth services from manual to automatic in the Windows Services app.

When software is set to automatic in the Windows Services app, it can start and stop without user intervention. This is ideal for applications that must run in the background without interruption, such as Bluetooth.

Follow these steps to accomplish this:

1. Click the search icon in the Windows taskbar to look for the ‘Services’ app.
2. Scroll down in the Services window until you find ‘Bluetooth Audio Gateway Service’ and ‘Bluetooth Support Service.’
3. Set the Bluetooth Audio Gateway Service’s startup type to Automatic by double-clicking on it. Repeat the process with the Bluetooth Support Service.
4. After you’ve made all of the changes, restart your device to see if the problem still exists.

Uninstall Bluetooth Devices

If your AirPods do not appear in the Human Interface Devices and it is already set to “Automatic” in services, but your AirPods continue to act up, you can hard reset your Bluetooth by uninstalling the devices. This will eliminate all bugs and, hopefully, allow you to enjoy your connection for more than a few seconds.

Follow these steps to accomplish this:

1. Navigate to your Device Manager by typing it into the Windows search bar.
2. Click on ‘Bluetooth,’ and then uninstall the devices one by one until they are all gone.
3. After uninstalling all of them, restart your Windows PC to allow the Bluetooth drivers to reinstall without any of their previous bugs.

Use a Bluetooth dongle

As previously stated, the issue may arise if your AirPods and PC support different Bluetooth versions. If your PC does not support Bluetooth 5.0, your AirPods may be forced to downgrade their connection capacity, resulting in disconnection issues.

While you cannot upgrade your device’s built-in Bluetooth version, you can use a Bluetooth dongle with version 5.0 instead. This allows your Windows PC to match the version of your AirPods, resulting in faster data transfer and a more stable connection.

CONCLUSION About Why Wont My Airpods Stay Connected

Now that you have the necessary knowledge to stop your headphones from disconnecting on their own, you can enjoy audio that’s free of interruptions.

FAQs About Airpods

Why does my AirPods keep disconnecting?

The issue is usually that your AirPods are connected via Bluetooth, but the output source is different. Navigate to System Preferences -> Sound, then the “Output” tab. Select your AirPods, and if they are already selected, switch back to computer audio for 10 seconds before selecting the AirPods again.

What should you do if your AirPods refuse to connect?

If your AirPods not staying connected, make sure they’re charged, Bluetooth is turned on for the device you want to connect to, and reset the device before trying again. If none of those steps work, unpair your AirPods from your device, reset them, and then reconnect them.

Why does my Bluetooth keep disconnecting?

The Battery Optimization feature on Android phones saves your battery from background apps and running programs. If this option is enabled, the Bluetooth connection will be terminated. Open the Settings app and navigate to the Battery section.