Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)

We’ve all been there. With Insignia remote in hand, you sit in front of your screen, and the frustration sets in. You just invested in a top-of-the-line entertainment system with a shiny new Insignia TV, and now the remote isn’t working.

Don’t worry; you’re not alone. Luckily, a few simple troubleshooting steps can help quickly get you back in front of the tube.

How To Fix Insignia Remote TV Not Working?
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)

In this blog post, we’ll provide insight into what might be causing your remote to fail and how you can troubleshoot it so your entertainment experience isn’t interrupted.

We’ve got your answers, from battery and power issues to broken buttons and dirty remotes. So strap in, grab a snack, and let’s get started on your guides to troubleshooting those pesky Insignia TV remote not working issues.


The most common way to fix a non-working Insignia TV remote is to replace the batteries. However, if that does not work, you may contact Insignia Technical Support for further assistance.

Insignia TV Remote Troubleshooting

Dead batteriesReplace the batteries in the remote.
Interference from other devicesMove the remote away from any other devices that emit infrared light, such as a DVD player or Blu-ray player.
Damaged remoteIf the remote is physically damaged, it may not work properly. Try replacing the remote.
Incorrectly paired remoteIf the remote is not paired correctly with the TV, it will not work. Try re-pairing the remote with the TV.
Faulty TVIf the TV is faulty, it may not be able to communicate with the remote. Try resetting the TV or contacting customer support.
Fixing Insignia TV Remote Not Working
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)

When it comes to troubleshooting Insignia TV remote issues, there are two primary causes. The first is a malfunctioning remote, while the second is an incorrect setup with the television set.

Therefore, it’s essential to identify which of these problems is causing the issue before attempting to resolve it.

There are numerous potential causes for malfunctioning remotes, such as a dead or weak battery, physical damage to the device, interference from other electronics, and incorrect device programming.

Different solutions may be necessary depending on the cause of your remote not working correctly. For example, replacement batteries may be needed if the battery is weak or dead.

If there has been physical damage to the remote, repair or replacement may be necessary. Additionally, if there has been an incorrect setup with the television set, this should be investigated and resolved as soon as possible.

Incorrect setup with the television set can impose its own unique set of issues. This can generally refer to anything from incorrect device pairing between devices like streaming boxes and soundbars to obsolete firmware in the remote or television set.

Therefore, a thorough investigation of all relevant home theater components is highly recommended to resolve any issues stemming from the incorrect setup of devices.

Furthermore, manufacturer support should always be consulted when dealing with any technical questions related to Insignia products.

Recommended:  How To Fix Samsung TV Blurry Screen? 6 Easy Ways

The best way forward when troubleshooting Insignia TV remote issues is to explore potential causes and act accordingly fully.

Depending on whether these problems are due to a malfunctioning remote or incorrect setup of devices, different solutions must be sought to adequately address them and get back to enjoying your favorite media content.

Thankfully, these solutions aren’t too complicated and should have you back up and running in time – provided you have verified all setup-related components. With that being said, now let’s take a look at another integral part of resolving TV remote problems: checking batteries and programming code lists.

How To Fix Your Insignia TV Remote Control That is Not Working?


Troubleshooting Insignia TV remote issues can be caused by two main things: a malfunctioning remote or incorrect setup with the television set.

Solutions for the first involve replacing batteries, repairing or replacing physical damage, and investigating any other interfering electronics; solutions for the second involve checking all device pairing and updating firmware in the remote or television set.

Consulting manufacturer support is recommended when dealing with any technical questions related to Insignia devices, and batteries and programming codes should also be checked as part of the troubleshooting process.


The troubleshooting process for Insignia TV remote issues begins by ensuring that the batteries in the remote are working correctly.

It is also essential to consult the codes list provided by the manufacturer to ensure that your device is correctly paired with your television model, as it may be misconfigured.

For example, suppose the device settings are incorrect, or the batteries run out of power. In that case, it can lead to unusable or erratic signals being sent when trying to access functions on the remote.

It is easy to test whether it’s a battery issue or configuration issue; replace the batteries and confirm that they are correctly inserted according to directions on the back of them.

If this does not solve the problem, double-check that all codes on the settings menus line up correctly; if not, recheck with the code list from the manufacturer and make the necessary changes.

Such adjustments might require restarting the remote and TV after making any changes. Ensuring these two primary components are working correctly will solve most issues associated with an Insignia TV remote not working.

After these have been checked, it is time to move on to testing issues using alternate modes, which will be discussed further in the next section.

  • According to a 2019 survey, approximately 21% of Insignia owners reported experiencing issues with their remote.
  • 33% of surveyed Insignia owners said they were likely to purchase a new remote due to their current one not working correctly.
  • A 2021 study found that over 18% of surveyed Insignia TV owners experienced problems within the first year of owning the product.
image 162
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)


After checking batteries and verifying the compatibility of the codes, adjusting the mode and performing a test can be one of the final steps that should be taken when troubleshooting the Insignia TV remote not working issue.

Switching from Standard to Cable, PC, or other modes could produce better results. The user interface should have a visual check or icon representing the device you are trying to control if it looks like a TV, cable, or standard is likely correct.

Users should always run an additional test when switching to any new mode to ensure it works correctly.

This can usually be done by pressing Channel Up/Down or Volume Up/Down on the remote and seeing if it correctly adjusts the volume or changes the TV channel.

Recommended:  How to Control Your TV with Alexa? (6 Easy Steps!)

Always focus on basic commands such as power and volume when changing modes and testing, as they will help confirm whether the remote works correctly.

These two suggestions are generally agreed upon as simple fixes. Still, depending on which model Insignia remote users are using, they may need more powerful troubleshooting methods in some cases.

No matter which method of fixing an Insignia TV remote not working issue, the next step should be troubleshooting malfunctions directly with the remote control.


Troubleshooting remote control malfunctions can be a tricky endeavor. If the remote isn’t responding when pressing buttons, the battery may not be adequately connected or installed.

It could also be that the remote doesn’t have enough charge, so it might be necessary to replace the battery with a new one and then retry testing.

There may be interference from other electronics in the area, such as Wi-Fi devices, cell phones, and other electronics emitting signals at a frequency similar to the remote control.

To remedy this situation, try moving away from other electronic devices far enough so that they don’t interfere with each other, and then test if the Insignia TV remote is working correctly.

In some scenarios, issues can arise due to the failure of specific components in the Insignia TV, which cause the malfunctioning of its remote.

To diagnose this problem, one should try using another remote working perfectly on another device to see if it works correctly on the Insignia TV. If not, it most likely means that some internal components inside the television have failed and will require professional repair services.

No matter what kind of troubleshooting one may do to attempt to fix their Insignia TV Remote problems, understanding how changing modes and testing works first can help make diagnosis easier.

Then, as troubleshooting progresses, it may reveal problems that need more attention than switching modes or testing remotes. Therefore, the next section will explore other diagnostic techniques for troubleshooting Insignia TV Remote issues.

Troubleshoot Inisgnia TV Remote Not Working
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)


Troubleshooting with the Indicator Light is a great way to determine the cause of remote control malfunctions.

The indicator light on most remotes will flash when a button is pressed, and if it does not, that indicates there could be a faulty power supply or other internal parts failure.

However, if the indicator light works, it could just mean the batteries are drained and need replacing. It can help narrow the range of possible issues so you don’t have to go through every potential problem.

Understanding your cable box’s signal can also help troubleshoot remote control problems.

For example, if it uses an infrared signal, ensure nothing is blocking the line of sight between the remote and the device you want to control. The remote must be pointed at the device to transmit codes to it successfully.

This line-of-sight issue does not affect radio frequency-based remotes, as those use waves instead of direct line-of-sight signals.

Having established whether signal strength could be an issue with troubleshooting your remote, now comes the time to ensure all parts are working correctly before transitioning into fixing any particular problem that may arise – which we’ll discuss next in more detail!


Depending on your remote type and its age, the options may vary when troubleshooting and fixing minor problems. For example, suppose you have a more modern remote that utilizes Bluetooth or RF signals.

Recommended:  Where Are Samsung TVs Made? (Top Best Answered!)

In that case, you can reset the connection between the remote and the TV by pressing the ‘Reset’ button—this can usually be found on either the back of the remote or in the settings menu.

Suppose you have an older infrared remote control. In that case, you may need to replace the batteries with new ones, ensure the line-of-sight is apparent between the remote and its sensor on the television itself, and press the ‘OK’ button several times until it syncs up again.

It’s also possible that settings on your television need to be adjusted, such as disabling power saving mode. So again, going through every option before replacing any hardware is essential.

For some types of remotes, like those used for cable boxes and streaming sticks, reprogramming keys, and codes will almost certainly be necessary if none of these steps works.

This process can be complicated and time-consuming, but following instructions carefully should ensure a successful outcome.

As such, it’s best to jump into this endeavor only when all other solutions have failed – after all, nobody likes having to sit through a complicated setup procedure, especially when their television isn’t working correctly!

With this in mind, let us now focus on understanding the reprogramming keys and codes for various types of remotes.

Easy Fix for Insignia TV Remote Not Working
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)


The previous section discussed various ways to troubleshoot Insignia TV remote not working issues. Generally, this can be resolved using new batteries, resetting the remote, cleaning it, and updating the software.

However, if none of these approaches have worked, then it may be necessary to reprogram the keys and codes associated with the remote. This process involves reconfiguring or remapping the buttons on the remote to predetermined commands.


Some may debate whether this is a good approach, as it relies on factory settings no longer supported by the manufacturer.

On the one hand, this can be considered an outdated and potentially unreliable method, as it depends upon a specific set of settings that may no longer be available or compatible with your model.

On the other hand, if you have exhausted all other options and are having difficulty finding a suitable replacement remote, reprogramming keys and codes might be more reliable than purchasing a new one.


Manufacturers often discontinue specific models of remotes and thus have limited resources for supporting old products.

However, numerous reports have been from customers who have successfully reprogrammed their existing remotes using official keycode lists posted online by manufacturers and users alike.

Reprogramming can also take advantage of advanced features provided by newer versions of remotes – such as the ability to control multiple devices at once or program complex functions like turning off an entire entertainment system in one button press.

Reprogramming can be efficient and affordable if you can access the correct programming information.

How To Troubleshoot Insignia TV Remote Not Working?
Easy Troubleshooting Insignia TV Remote Not Working Issues (Must Try!)


Are specific Insignia TV remote models more prone to having problems than others?

The answer to this question is that the potential for a remote to have problems varies from model to model. For example, some Insignia TV remotes feature advanced features, like voice control, Bluetooth connectivity, and app integration, that may be more likely to malfunction than simpler models due to their complexity. Additionally, some models may have older components or be prone to damage through wear and tear in comparison to newer models that have been designed with improved durability and more innovative technologies.

Could the problem be related to the batteries or the remote’s settings?

Yes, the issue could be related to the batteries or the parameters of the remote. Weak or dead batteries may impede the remote’s performance, and poor battery contact or static electricity may also cause temporary issues. Before investigating other potential causes, it may be prudent to examine these factors.

What steps can I take to try and fix my Insignia TV remote?

Manually resetting an Insignia TV remote is one possible solution. Locate the “Home” button on your remote, press and hold it for a few seconds, and then release it. If this does not work, try turning off the television, unplugging it, and waiting 60 seconds before simultaneously tapping and holding the Left, Menu, and Back buttons.

Common Insignia TV Questions

What can cause an Insignia TV remote to stop working?There could be several reasons why your Insignia TV remote stops working, including weak batteries, being out of range, or connectivity issues.
How can I tell if my Insignia remote is specifically for an Amazon Fire TV?Most Insignia Fire TV remotes will have the Amazon logo on the bottom (near the batteries) and the name “Insignia Voice Remote” printed on the back.
What should I do if my Insignia smart TV remote stops working?Try replacing the batteries or pairing the remote again with your TV following the manufacturer’s instructions.
Can I use my smartphone as an Insignia TV remote?Yes, you can use your smartphone as a remote for your Insignia TV by downloading the Insignia Remote App, which is available for Android and iOS phones.
How do I reset my Insignia TV remote?To reset your Insignia TV remote, remove the batteries and wait for 30 seconds. Then, put the batteries back and point the remote at the TV while pressing and holding the Pair button for 10 seconds.
How do I pair my Insignia remote with my Amazon Fire TV?Make sure your Insignia TV and Amazon Fire TV are connected to the same Wi-Fi network. Then, press and hold the Home button on your Insignia remote for a minute. After that, press the Select button to pair the remote with your Amazon Fire TV.
What can I do if my Insignia remote still doesn’t work even after replacing the batteries?You can try resetting the remote or downloading the Insignia Remote App. If those steps don’t work, you may need to buy a new remote for your TV.
Can I use my Insignia remote with a Roku TV?No, Insignia remotes are specifically designed for Insignia TVs and may not work with other brands like Roku TV.
What should I do if my Insignia TV doesn’t have buttons?If your Insignia TV doesn’t have buttons, you can still control your TV using an Insignia remote app on your mobile device.
Is a malfunctioning Insignia TV remote unfixable?In most cases, no. The solutions mentioned above should solve the problem. However, if the remote is beyond repair, you’ll have to buy a new Insignia TV remote.


  • Trevor Eason

    I am Trevor Eason an entrepreneur, a designer, web developer, and software engineer currently living in Dallas, TX. My interests range from technology to photography. I am also interested in entrepreneurship, gaming, and basketball. I run my own Tech Win Reviews blog. Hope you will join me for all your Samsung and Tech Reviews and recommendations.

Similar Posts